Pumps
Designed and Manufactured to Meet Demanding Hydraulic Applications.
The pump is the heart of the hydraulic system, supplying a certain flow of fluid under pressure, which is determined by the load into the system. (pressure in the system develops in reaction to the load). Hydraulic fluid acts as a transporter of energy, flowing through piping (circulatory system), generating a flow of fluid, regardless of the type of pump used in the system. Pressure is the result of resistance to the flow that a pump tries to produce. The maximum pressure in a hydraulic system depends on the least resistance to flow.
The pumping action is the same for all pumps; all pumps generate an increasing volume at the suction side and a decreasing volume at the pressure side, but the elements which perform the pumping action are not the same.
GS Global Resources offers a wide range of pumps from today’s technology manufacture’s leader in the application for mobile, industrial, and truck markets are designed and manufactured to meet the most demanding requirements in hydraulic systems.
Can’t find what you are looking for? Contact us today to discuss your questions or application needs with our design team.
-
-
-
197 Series Pump
Gear Pump – Small to Medium Displacement Sleeve, Hydraulic Bushing Pumps, 4.5 – 17 GPM. The 197 series bushing pump has a minimum operating speed of 600 rpm, continuous operating speed 2400 rpm. Drive shaft PL factor; Integral up to 10000, Continental 6000. Built from cast iron for robust applications. Single and multiple units are […]
-
-
-
-
257 Series Pump
Gear Pump – Medium Displacement Sleeve Bushing Pump. The 257 Series pump is a heavy-duty sleeve bushing design in medium frame size. Working Pressure up to 4500 psi. Cubic inch displacements from 1.29 through 6.43 with speeds up to 2400 RPM and flows up to 65 GPM. The bushing pump is also available with outboard bearing options […]
-
-
-
-
360 Series Pump
Large Gear Pump – Sleeve Bushing Design, Large Frame Size. A large displacement sleeve bushing pump, in a large frame size, with working pressures up to 3500 psi, cubic inch displacements from 1.80 – 9.00, speeds up to 2400 RPM and flows up to 93 GPM. The 360 Series cast iron gear pumps are primarily […]
-
-
-
-
5000/5100 Series Pump
Gear – Medium Displacement Roller Bearing Gear Pump, 5.5 – 28 GPM. The P5000/P5100 series is a medium displacement, roller bearing gear pump. This pump is a cast iron pump ensuring a strong and long-lasting product able to withstand robust applications. Single and multiple units are available upon request. The pressure loaded wear plates of […]
-
-
-
-
AP/APR05 Pump
The Series AP product range includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves.
-
-
-
-
AP/APR212 Pumps
External Gear Pump, Aluminum, 4.4 – 27.1 Displacement cm³/rev. The AP212 family has made it possible to achieve high operating pressures, excellent volumetric and mechanical efficiency and on specially developed units (LN – Low Noise) even lower noise levels. This is made possible by: The new design of gear teeth and balancing areas Use of […]
-
-
-
-
AP/APR212HP Pump
External Gear Pump, Cast Iron, 15.1 – 34.1 Displacement cm³/rev. Maintaining all the basics AP212 project characteristics, the AP212HP series is improving the reliability of the complete product, strongly increasing the mechanical resistance of the pump body. This important feature, reached through the use of cast iron material and dedicated body shape, allows the life […]
-
-
-
-
AP250HP Series Pump
External Gear Pump, Aluminum, Single and Multiple, 40.0 – 75.0 Displacement cm³/rev. The product range of SpA includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves. Gear Pumps […]
-
-
-
-
AP300 Series Pump
External Gear Pump, Aluminum, 27.0 – 93.0 Displacement cm³/rev. The Series AP product range includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves. External gear pumps are widely […]
-
-
-
-
AP312HP Series Pump
External Gear Pump, Cast Iron, Single and Multiple, 40.0 – 75.0 Displacement cm³/rev. The product range of SpA includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves. Thanks […]
-
-
-
-
1P Series Pump
Aluminum-Body, Low-Power, Oil-Operated Pumps for Auxiliary Services, 1.1 – 8 Displacement cm³/rev. The Pumps Series A 1P gear pump usually consists of a gear pair supported by two aluminum bushes, a body, a securing flange and a cover. The shaft of the driving gear projecting beyond the flange mounts a twin – lip seal ring […]
-
-
-
-
ALP GHP Pumps
Cast Iron Flanges, Aluminum Body, High-Performance Single Pumps, 1.4 – 87 Displacement cm³/rev. The Pumps GHP are high-performance single gear pumps with an aluminum body, and a cast iron flange and cover. Displacements range from 1.4 up to 87 cc/rev (Group 1, 2 and 3). Available in different configurations (European, SAE, German standard) in a […]
-
-
-
-
ALP Pumps
Aluminum-Body, Low-Power, Oil-Operated Pumps for Auxiliary Services, 1.4 – 200 Displacement cm³/rev. The Pump ALP Series (where groups named ALP1, ALP2, ALP3, and ALP4) are suitable for the most different application in both industrial and mobile sectors. Produced in four different groups. Within each of them, the different displacements (between 1.4 and 200 cm³/rev) are […]
-
-
-
-
ALPC GHPC Pumps
High-Pressure, Short Multiple Pumps,1,4 -35,2 Displacement cm³/rev. The ALPC & GHPC pumps are well designed to fit applications where multiple pumps are required to be driven by just one motor and space is too narrow for standard multiple pumps. Available displacements vary from 1.4 to 13.8 cm3/rev for group 1 and from 4.5 to 35.2 […]
-
-
-
-
C Series Pump
Variable Displacement Axial Piston Pump, Pressure Rating of 6,090 psi. The C Series Variable Displacement Axial Piston Pumps are engineered for heavy-duty mobile equipment applications. Pumps offer a pressure rating of 6,090 psi, durable construction and a compact footprint. C Series variable displacement piston pumps have been designed for use in closed circuit hydrostatic applications. […]
-
-
-
-
C101/C102 Series Pump
Fixed Cast Iron Gear Pump, Integrated Relief Valve, and Load Hold Valve, 5,1-6,4. Displacement. The C101/C102 series combination pump valves (fixed gear pump) provide the most reliable, trouble-free performance in the industry for the dump truck and trailer applications. Operating pressures up to 138 bar (2,000 psi) speeds up to 2,400 rpm, flows up to […]
-
-
-
-
D Series Pump
Fixed Aluminum Gear Pump, 1.87-10.50 cc/rev Displacement. The Aluminum Pump D Series fixed displacement gear pump offers high performance and high power density due to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump or a pump […]
-
-
-
-
F12 Series Pump
Axial Piston Fixed Displacement Hydraulic Motor – Large Frame. The F12 hydraulic motor series has operating pressures up to 480 bar (7,000 psi) and speeds up to 7300 rpm. The F12 motor is a robust design motor and can be used in numerous applications in both open and closed loop circuits. Sizes from 30-250cc. The […]
-
-
-
-
G101/G102 Series Pump
Fixed Cast Iron Gear Pump, Integrated Relief Valve, and Load Hold Valve, 5,1-6,4. Displacement. The G101/G102 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making it an ideal selection for the Vocational & Municipal Equipment market. It is available as a standard pump with an integrated valve […]
-
-
-
-
GP1 Series Pump
Fixed, Two-Piece, Cast Iron, 23-80cc. Displacement. These truck gear pumps are ideal for operators of light trucks for their hydraulic power needs. The Cast Iron Pump GP1 Series fixed displacement gear pump offers high performance and high power density dues to its two-piece cast iron construction, making it an ideal selection for the Aerial and […]
-
-
-
-
ELIKA EL12, EL13, EL14 Single Series Pumps
Low Noise, Low Ripple, High-Efficiency, High-Pressure Gear Pumps, 7 – 200 Displacement cm³/rev. ELIKA® pumps are extremely silent gear pumps that can be applied in situations where low noise levels are required. Using a low noise ELIKA® gear pump will eliminate harmful noises for persons and their surroundings. ELIKA® gear pumps are fully interchangeable with […]
-
-
-
-
ELIKA ELI2 Multiple Series Pumps
Double Pumps and Multiple Pumps, 7 – 35 cm³/rev. ELIKA, being low-noise and low-ripple, ELI2 Multiple Series Gear Pumps is a perfect fit for all those applications that require low noise levels. The use of ELIKA gear pump eliminates adverse noise effects on humans and on the surrounding environment. The ELIKA reduces the noise level […]
-
-
-
-
GHP Series Pump
Pumps with Flange and Cover in Cast Iron, 1,4 – 87 cm³/rev Displacement. These range of products have a new series of pumps named GHP, where groups named GHP1, GHP2, and GHP3 are suitable for the most different application in both industrial and mobile sectors. Available in different configurations (European, SAE, German standard) in a […]
-
-
-
-
GP0 Pump
Gear Pump, High-Performance Version, Hydraulic Drive, 6 (1.5) GPM. The GP0 gear pump with displacements up to 3,2 cm³ (0.20 inch³), Pmax 260 bar (3800 PSI), Speed from 500 to 8000 RPM. Flange, cover, and body are made of a high-quality aluminum alloy. These pumps are characterized by high-efficiency and low-noise levels through the entire rotation […]
-
-
-
-
GP0L Pump
Gear Pump, Light-Line Version, Hydraulic Drive, 6 (1.59) GPM. The GP0L Fixed Displacement gear pump, with displacements up to 2 cm³ (0.12 inch³), Pmax 250 bar (3600PSI), and speeds from 500 to 7000 RPM. Technical Features: Operating pressure 200 bar, Peak pressure 250 bar Cost-Effective design or circuits with a lower operating pressure High-quality aluminum alloy […]
-
-
-
-
GP1 Pump
Gear Pump, High-Performance Version, Hydraulic Drive, 21 (5.55) GPM. The GP1 gear pump with displacements up to 31 cm³ (1.89 inch³), Pmax 310 bar (4500 PSI), and speeds from 500 to 4000 RPM. Technical Features: Operating pressure 280 bar, Peak pressure 310 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level […]
-
-
-
-
GPA Series Pump
Fixed, Aluminum, 8-19cc., Displacement. These truck gear pumps are ideal for operators of light trucks for their hydraulic power needs. The Aluminum Pump GPA Series fixed displacement gear pump offers high performance and high power density dues to its aluminum construction, making it an ideal selection for Truck applications. The GPA/GP1 series gear pumps are […]
-
-
-
-
GP2 Pump
Gear Pump, High-Performance Version, Hydraulic Drive, 67 (17.65) GPM. The GP2 gear pump with displacements up to 31 cm³ (1.89 inch³), Pmax 310 bar (4500 PSI), and speeds from 500 to 4000 RPM. Technical Features: Operating pressure 280 bar, Peak pressure 310 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level […]
-
-
-
-
H Series Pump
Fixed, Aluminum, Pressure-Loaded Gear Pump, 9.88 – 36.50 cc/rev Displacement. Aluminum Pump H Series fixed displacement gear pump offers high performance and high power density due to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump, a […]
-
-
-
-
GP2L Pump
Gear Pump, Light-Line Version, Hydraulic Drive, 65 (17.17) GPM. The GP2L gear pump with displacements up to 30 cm³ (1.83 inch³), Pmax 300 bar (4350 PSI), and speeds from 400 to 4000 RPM. Technical Features: Operating pressure 270 bar, Peak pressure 300 bar Cost-effective design or circuits with a lower operating pressure High-quality aluminum alloy […]
-
-
-
-
GP3 Pump
Gear Pump, High-Performance Version, Hydraulic Drive,177 (16.76) GPM. The GP3 gear pump with displacements up to 100 cm³ (6.10 inch³), Pmax 320 bar (4600 PSI), and speeds from 350 to 3200 RPM. Technical Features: Operating pressure 290 bar, Peak pressure 320 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level in […]
-
-
-
-
GP3L Pump
Gear Pump, Light-Line Version, Hydraulic Drive, 177 (46.76) GPM. The GP3L gear pump with displacements up to 71 cm³ (4.30 inch³), Pmax 280 bar (4060 PSI), and speeds from 400 to 3500 RPM. Technical Features: Operating pressure 250 bar, Peak pressure 280 bar Cost-effective design or circuits with a lower operating pressure High-quality aluminum alloy […]
-
-
-
-
HD Series Pumps
Fixed, Tandem Pressure-Loaded Gear Pump, 30.18/10.5 cm³/rev Max. Displacement. The Aluminum Pump HD Series fixed displacement gear pump offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump, a […]
-
-
-
-
HM P1A Series Pumps
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 17 to 28 cm³ (1,04 to 1,71 in³), Continuous 280 bar (4060 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM P1A are designed to operate in a closed circuit. The available control systems make it easy to use these […]
-
-
-
-
Hi-Low (HL) Series Pump
Double Stage Pumps with Unloading Valves, 1st Stage- 1,4 – 4,1, 2nd Stage – 4,1 – 13,8 cm³/rev Displacement. The 1HL, 1PHL, and 2HL High/Low hydraulic gear pumps are special double-stage pumps with special integrated valves. The first stage, low displacement, high pressure. The second stage, high displacement, low pressure. RPM pump range 1,000 to […]
-
-
-
-
GP1L Pump
Gear Pump, Light-Line Version, Hydraulic Drive, 16 (4.31) GPM. The GP1L fixed displacement gear pumps, with displacements up to 8 cm³ (0.49 inch³), Pmax 270 bar (3900 PSI), and speeds from 600 to 6000 RPM. Technical Features: Operating pressure 230 bar, Peak pressure 270 bar Cost-effective design or circuits with a lower operating pressure High-quality […]
-
-
-
-
HPV-02 Variable Pump
Variable Displacement Pump for Closed Loop Operation, Displacement 54.7 to 281.9 CC/Rev, Max. Operating Speed 2400 RPM to 3900 RPM, Max. Pressure 500 Bar, Nominal Pressure 450 Bar, Power Take-Off (PTO) Flange, Internal Gear Pump (IGP) and External Gera Pump (EGP) Available. The HPV-02 variable pump is an axial piston pump designed for high pressure […]
-
-
-
-
P16 Series Pump
Fixed, Iron and Aluminum Gear Pump, 16-64cc, Displacement. The Iron and Aluminum Pump P16 Series fixed displacement gear pump offers high performance and high power density due to its part aluminum construction. The P16 fixed displacement gear pump offers a combination of high performance and lightweight due to combining a rugged cast iron pumping section […]
-
-
-
-
P2/P3 Series Pumps
Variable Displacement Axial Piston Pump, Operating Pressure of 4,060. Variable, swashplate piston pumps designed for operation in open circuit, mobile hydraulic systems. The perfect choice when it comes to cost-saving installation as well as high productivity and power density. Displacement from 60 to 145 cc/rev. The P2/P3 Series has been designed to meet the specific […]
-
-
-
-
PAVC Series Pump
Medium Pressure Super Charged Pumps, Pressure Rating 3,000 psi. The PAVC Medium Pressure/Super Charged Pumps provide reliable high-speed operation. With a pressure rating of 3,000 psi, they are ideal for a variety of medium pressure mobile and industrial applications. Featuring a flexible, compact design, Pavc Medium Pressure Pumps deliver a reliable,easy-to-use solution for a wide […]
-
-
-
-
HM P1M Series Pumps
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 28 to 36 cm³ (1,71 to 2,20 in³), Continuous 280 (4060 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM P1M is designed to operate in a closed circuit. The available control systems make it easy to use these pumps in […]
-
-
-
-
HM PF 10•12•16 Pump
Bent-Axis Axial Piston Pumps, Fixed Displacement 10 | 12 | 16 cm³ (0,61 | 0,732 | 0,976 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 10 | 12 | 16 fixed displacement axial piston pump is designed to work in an open circuit. The system […]
-
-
-
-
HM PF 107•125 Pump
Bent-Axis Axial Piston Pumps, Fixed Displacement 107 | 125 cm³ (6,63| 7,63 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 107 | 125 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain 40° […]
-
-
-
-
HM PF 45 Pump
Bent-Axis Axial Piston Pumps, Fixed Displacement 45 cm³ (2,75 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 45 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain 40° angle of inclination of the […]
-
-
-
-
HM PF 56•63 Pump
Bent-Axis Axial Piston Pumps, Fixed Displacement 56 | 63 cm³ (3,42 | 3,84 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 56 | 63 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain […]
-
-
-
-
HM PO Pump
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 7 to 18 cm³ (0,43 to 1,10 in³), Continuous 250 | 230 bar (3625 | 3335 psi), Pressure Intermittent 280 | 250 bar (4060 | 3625 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PO is designed to operate in a closed circuit. The available control systems […]
-
-
-
-
HM PS Pump
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 17 to 34 cm³ (1,04 to 2,07 in³), Continuous 280 bar (4060 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PS is designed to operate in a closed circuit. The available control systems make it easy to use these pumps […]
-
-
-
-
HM PX Pump
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 9+9 to 16+16 cm³ (0,55+0,55 to 0,97+0,97 in³), Continuous 280 bar (4060 psi), Pressure Intermittent 300 bar (4350psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PX is designed to operate in a closed circuit. The available control systems make it easy to use these pumps in any application for industrial and […]
-
-
-
-
HM PZA Pump
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 7 to 18 cm³ (0,43 to 1,10 in³), Continuous 250 | 230 bar (3625 | 3335 psi), Pressure Intermittent 280 | 250 bar (4060 | 3625 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PZA have been designed to operate in a closed circuit. The available control systems […]
-
-
-
-
PD Series Pump
Variable Displacement Piston Pump, Operating Pressure of 4,060 psi. The PD Series pump offers variable displacement axial piston pumps for open-circuit applications. Featuring a compact footprint and continuous operating pressure of up to 4,060 psi, PD pumps provide quiet operation and efficient control. The PD Series of Open-Circuit Piston Pumps boost productivity in medium pressure […]
-
-
-
-
HM80/90 PF Pump
Bent-Axis Axial Piston Pumps, Fixed Displacement 80 | 90 cm³ (4.99 | 5,49 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 80 | 90 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain […]
-
-
-
-
HP P2 Series Pumps
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 14 to 23 cm³ (0,85 to 1,40 in³), (Swashplate 14,5 | 19 | & 18), Continuous 250 bar (3625 psi), Pressure Intermittent 280 bar (4060 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HP P2 is designed to operate in a closed circuit. Control Systems are available […]
-
-
-
-
HP P4 Series Pumps
Closed Circuit Axial Piston Pumps, Variable Displacement , Max. Displacement from 17cc to 34 cc, SAE B Flange, (Swashplate 18 | 19 | 18 | 18 | 18°), Pressure Intermittent 300 (bar), 4350 (psi). The axial piston pumps series HP P4 34•46•50•58•65 is designed to operate in a closed circuit, for applications at medium pressure. Control […]
-
-
-
-
HP P6 55•65•78 Series Pump
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 55 to 78 cm³ (3,35 to 4,76 in³), (Swashplate 16,3 | 17,3 | 17,7 °), Continuous 420 | 400 bar (6090| 5800 psi), Pressure Intermittent 450 | 420 bar (6525 | 6090 psi), (Power-Transmission Hydrostatic Transmission) The axial piston pumps series HP P6 series is designed to operate […]
-
-
-
-
HP P8 Series Pumps
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 82 to 125 cm³ (5,0 to 7,6 in³), (Swashplate 18,0, 16,5, 20,0°), Continuous 400 bar (5800 psi), Pressure Intermittent 420 bar (6090 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HP 8 82•100•125 is designed to perform in closed circuit for high pressure operations. The various control […]
-
-
-
-
HPG (Series G) Pumps
Gear Pumps, Cast Iron Body, 4,cm³/rev. to 90,5 cm³/rev., up to 320 Bar. The HP Hydraulic series HPG (Series G) gear pumps are supplied in size group 2, 3 and 4. The series of products is even further completed with a full range of flanges, shaft ends, and available multiple pumps with or without valves […]
-
-
-
-
HPL (Series L) Pumps
Gear Pumps, Fixed Displacement, Aluminum Body, 0,19 cm³/rev. to 88 cm³/rev., up to 310 Bar. The HP Hydraulic series L (HPL..0, HPL..1, HPL..2, HPL..2 SG Version, HPL..3, HPL..3 SG Version, HPL..4 SG Version) pumps have aluminum bodies and are suitable for a wide range of applications. Available in five different sizes: Group 0, Group 1, Group 2, […]
-
-
-
-
PGG Series Pump
Fixed, High-Speed, Low Torque, Gerotor Pump, 16-64cc, Displacement. The Aluminum Pump PGG Series fixed displacement High-Speed Low Torque Gerotor pump offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. • Flows from .95 GPM to […]
-
-
-
-
PGP031 Series Pump
Fixed, Cast Iron Gear Pump, Single, and Multiple, 16.2-64.6 cc/rev, Displacement. The PGP031 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction. • Flow range to 38.4 gpm (145.4 lpm) per section • Displacements from .985 to 3.94 cir (16.2 to 64.6 cc/rev) • Operating pressures up to […]
-
-
-
-
K3VG Series Pump
Swash Plate Variable Displacement Axial Piston Pump. The K3VG Series are variable displacement axial piston pumps of swash plate design for industrial equipment. The K3VG Series are available in size ranging from 63 to 560 cm³/rev with various control options including a highly precise electro-hydraulic servo regulator “ILIS”. Main features of the K3VG Series includes […]
-
-
-
-
K3VL Series Pump
Variable Displacement Swash Plate Design, Open Loop. The K3VL Series – medium pressure, open circuit, axial piston pumps are designed for mobile, industrial, and marine applications. The pump’s rotating groups are based on the proven design of the K3V and K3VG pumps. K3VL pumps are available in nominal displacements ranging from 1.71 to 12.20 in³/rev […]
-
-
-
-
K3VLS Series Pump
Variable Displacement Swash Plate Design, Open Loop, Displacement 50 (cm³) to 150 (cm³). The K3VLS series are variable displacement axial piston pumps of swash plate design, suitable for use in mobile applications and industrial vehicles with medium pressure hydraulic systems. The K3VLS pumps enable flexible configuration in a wide range of applications with their compact […]
-
-
-
-
K7V Series Pump
Low Noise Variable Displacement Axial Piston Pump. The K7V Series are variable displacement axial piston pumps of swashplate design, suitable for use in mobile applications. A long life is obtained by adopting large capacity of bearing and thicker shaft which reduces the load on the edge of bearing rollers. The power density if 1.5 times […]
-
-
-
-
K7VG Series Pump
Swash-plate Axial Piston Pump The K7VG high-pressure swashplate pump developed for general industrial machinery use and is based on long and rich experience. The adoption of the high-load bearing and friction-free contacting mechanism of shoes has achieved high reliability and long life. The unique compact rigid housing construction in addition to the semi-cylindrical swash-plate and […]
-
-
-
-
K8V Series Pump
Variable Displacement Swash Plate Design, Closed Loop. The K8V series with a range in pump size from 71 to 130 cm3/rev are equipped with electric or hydraulic pilot displacement control. The K8V series pumps, having the integrated components required for a closed system, such as a charge pump, high and low-pressure relief valves, and a […]
-
-
-
-
LX/LZ Series Pumps
Fixed Displacement Axial Piston Pump. The LX/LV series are fixed displacement axial piston pumps of bent axis design. They can operate for long periods of time under severe conditions. such as high-pressure continuous drive, use of fire-resistant fluids, ect. The series is suitable for the heavy duty application in press machine and steel making plants.
-
-
-
-
124/424 Series Pump
Gear – Small Frame, High-Pressure Bushing Gear Pump, 2.5 – 10.5 GPM. The P124 is a small frame hydraulic bushing gear pump with high-pressure capabilities, the 424 series has the same capabilities as the P124, but is capable of higher pressures. Cast Iron construction, built to with-stand robust applications. Compatible with mineral oil, water glycol, […]
-
-
-
-
LVP 017 Series Pump
Bent Axis Variable Displacement Axial Piston Pump. The LVP 017 Series are manual variable displacement axial piston pumps of bent axis design for high-pressure jacks. The bent axis type axial piston pumps have features such as high efficiency and long life. They can operate for long periods under severe conditions: high-pressure continuous drive, use of […]
-
-
-
-
LXV/LZV Series Pump
Variable Displacement Axial Piston Pump The LXV/LZV series are variable displacement axial piston pump of bent axis design and have heavy duty bearings to achieve long life. They can operate for long periods of time under severe conditions: high-pressure continuous drive, use of fire-resistant fluid, etc.
-
-
-
-
HM PF 23•28•32 Pump
Bent-Axis Axial Piston Pumps, Fixed Displacement 23 | 28 | 32 cm³ (1,4 | 1,71 | 1,95 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 23 | 28 | 32 fixed displacement axial piston pump is designed to work in an open circuit. The system […]
-
-
-
-
PGP020 Series Pump
Fixed, Cast Iron Gear Pump, 16.2-64.6 cc/rev, Displacement. The 020 series fixed displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction making them an ideal selection for the Vocational Truck, Winch, and Oil & Gas markets. They are available as single, or multi-section pumps. and […]
-
-
-
-
PGP051 Series
Fixed, Cast Iron Gear Pump, Multiple, 21-105 cc/rev, Displacement. The PGP051 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction. The 051 series fixed displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction making them an ideal selection […]
-
-
-
-
PGP076 Series Pump
Fixed, Cast Iron Gear Pump, Multiple, 50-202 cc/rev, Displacement. The PGP076 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction. • Flow range to 121.4 gpm (459.5 lpm) per section • Displacements from 3.07 to 12.3 cir (50 to 202 cc/rev) • Operating pressures up to 200 bar […]
-
-
-
-
PGP130 Series Pump
Fixed, Cast Iron Gear Pump, Multiple, 50-202 cc/rev, Displacement. The PGP130 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making it an ideal selection for the construction equipment market in particular mini-construction equipment. Available with industry standard output shafts, ports and mounts, these pumps deliver up to […]
-
-
-
-
PGP315 Series Pump
The 315 series fixed displacement gear pumps offer high-pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. • Flow range to 32 gpm (121 lpm) […]
-
-
-
-
M4 PV 21•28•37 Pump
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 21 to 37 cm³ (1,28 to 2,26 in³), (Swashplate 18°), Continuous 250 bar (3625 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series M4 PV is designed to operate in a closed circuit. Control systems actually available are making easy to […]
-
-
-
-
PGP350 Series Pump
Fixed, Cast Iron Gear Pump, Multiple, 21-105 cc/rev, Displacement. The 350 series fixed displacement gear pumps offer high-pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. […]
-
-
-
-
HM PLB Series Pumps
Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 7 to 18 cm³ (0,43 to 1,10 in³), Continuous 210 bar (3045 psi), Pressure Intermittent 230 bar (3335 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PLB is designed to operate in a closed circuit. Displacement range 7cc thru 18cc, R or L hand rotation, single […]
-
-
-
-
PGP365 Series Pump
Fixed, Cast Iron Gear Pump, Multiple, 44-147.5 cc/rev, Displacement. The 365 series fixed displacement gear pumps offer high-pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. […]
-
-
-
-
PGP505 Series Pump
Fixed, Aluminum, Gear Pump, 3.0 – 12.0 cc/rev, Displacement. The 505 series fixed displacement gear pumps offer cost-effective, high power density due to their aluminum, bushing block construction, making them ideal in a broad selection of markets such as Material Handling, Agriculture, Turf, as well as a variety of Industrial Applications. They are available as […]
-
-
-
-
PGP511 Series Pump
Fixed, Aluminum, Gear Pump, 6.0 – 31.0 cc/rev, Displacement. The 511 series fixed displacement gear pumps offer cost-effective, high power density due to their aluminum, bushing block construction, making them ideal in a broad selection of markets such as Material Handling, Agriculture, Turf, as well as a variety of Industrial Applications. They are available as […]
-
-
-
-
PGP517 Series Pump
Fixed, Aluminum, Gear Pump, 16 – 70 cc/rev, Displacement. PGP 517 pump offers superior performance, high efficiency and low noise at high operating pressures. The 517 series has a wide variety of standard options and is available to meet specific application requirements. • Sizes from 16-70cc • Operating pressures up to 250 bar (3,500 psi) […]
-
-
-
-
PGP610 Series Pump
Fixed, Cast Iron, Gear Pump, 7-32 cc/rev, Displacement. The 610 series fixed displacement gear pumps offer the most volumetrically efficient and power dense solution due to their interlocking, two-piece cast iron design, making 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is widely used in […]
-
-
-
-
PGP620 Series Pump
Fixed, Cast Iron, Gear Pump, 19-50 cc/rev, Displacement. The 620 series fixed displacement gear pumps offer the most volumetrically efficient and power dense solution due to their interlocking, two-piece cast iron design, making 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is widely used in […]
-
-
-
-
HPR-02 Self Regulating Pump
The self-regulating HPR-02 is a high perssure axial piston pump in a swash plate designed for open loop systems. With both clockwise and counter clockwise rotation, it is self priming at high nominal speeds. It can reach a higher rotating speed by tank pressurization or swash angle reduction. It is a good fit for application […]
-
-
-
-
PGP640 Series Pump
Fixed, Cast Iron, Gear Pump, 30-88 cc/rev, Displacement. The 640 series fixed displacement gear pumps offer the most volumetrically efficient and power dense solution due to their interlocking, two-piece cast iron design, making 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is widely used in […]
-
-
-
-
Premier Series Pump
Variable Flow, High-Pressure and High-Speed, For Open Circuits SAE, ISO, DIN), Continuous Pressure Rating up to 6,000 PSI, Intermittent Pressure Rating up to 7,250 PSI, Five Frame Sizes (80 cc – 260 cc), Maximum Speed of 2,550 RPM. The Premier Series features superior design and simplified maintenance; the Premier Series delivers high-pressure variable piston pumps […]
-
-
-
-
PVP Series Pump
Variable Volume Displacement Piston Pump, Operating Pressure of 3,600 psi. The PVP Series provides durable variable volume piston pumps for medium pressure applications. With aa pressure rating of 3,600 psi and a wide range of controls, PVP pumps are efficient and reliable. The PVP Series is flexible and high-performing, resulting in increased uptime with fast […]
-
-
-
-
PVplus (PV+) Series Pump
Axial Piston Variable Pumps, Operating Pressure Up to 420 bar. The PVplus (PV+) is an open circuit, variable swashplate piston pump. Optimized for heavy-duty industrial and marine applications. Operating pressures of up to 420 bar, high-speed ratings, a wide range of highly responsive controls, and a displacement from 16 to 360 cc/rev. The PVplus (PV+) provides […]
-
-
-
-
SDV Series Pump
Fixed Displacement, Single or Double Medium Pressur Vane Pumps. The SDV Series is a fixed displacement vane pump, ideal for low to mid pressure applications up to 2250psi. The double pump provides the flexibility of two different displacements within one housing. The single pump provides one displacement within one housing. The compact design and low […]
-
-
-
-
T1 Series Pump
Axial Piston Fixed Pump, Operating Pressure of 5,000 psi and Speed Up to 350 bar. The T1 hydraulic truck pump series has operating pressures up to 350 bar (5,000 psi) and speeds up to 3200 rpm. The T1 pump has a robust design that provides circuit reliability for the most demanding truck applications, displacement 81 and […]
-
-
-
-
PT6C Series Pump
Small to Medium Displacement Vane Pump. The EVO vane line is both versatile and ruggedly built for the toughest applications. The PT6C Series is a small to medium displacement vane pump, with a maximum psi of 4000. The PT6C is very mobile, it is lightweight with a phosphate coating. The PT6C has a double lip […]
-
-
-
-
PT6D Series Pump
Medium Displacement Vane Pump. The EVO vane lane is both versatile and ruggedly built for the toughest applications. The PT6D Series is a medium displacement vane pump, with a maximum psi of 4060. The PT6D Series is perfect for mobile or industrial use with a phosphate coating. The PT6D is perfect for applications that need double lip […]
-
-
-
-
PT6E Series Pump
Medium Displacement Vane Pump. The EVO vane line is both versatile and ruggedly built for the toughest applications. The PT6E series is a large displacement vane pump. The PT6E series has a large displacement, uni-rotational plates, and phosphate coating, making the PT6E series ideal for applications involving roll-off, snow and ice control, and low boy/transfer trailers.
-
-
-
-
PT7B Series Pump
Small Displacement Vane Motor The EVO vane line is both versatile and ruggedly built for the toughest applications. The PM4C series are small displacement vane motors. The PM4C series has a small displacement and low torque, making it ideal for applications involving internal and external drain and sever or standard duty conditions. In addition, the […]
-
-
-
-
PT7D Series Pump
Medium Displacement Vane Pump. The EVO vane line is both versatile and ruggedly built for the toughest applications. The PT7D series is a medium displacement vane pump, with a maximum psi of 4060, and higher pressures and speed. The PT7D series 12 vane technology makes it ideal for industrial uses. The phosphate coating and bi-rotational […]
-
-
-
-
HPX PA2 Pumps
Gear Pumps, Silent, Cast Iron, Displacement from 6,1 cm³/rev. up to 25,6 cm³/rev., Pressure up to 320 Bar. The HPX PA2 Cast Iron gear pumps are specified with helical teeth and a special finishing process that significantly reduces hydraulic pulsation of the oil flow, resulting in lower noise levels and consequently recommending them as the […]
-
-
-
-
Series AP100 Pump
External Gear Pump, Aluminum, 1.2 – 10.0 Displacement cm³/rev. The Series AP product range includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves.
-
-
-
-
PVG Series Pump
Variable-Displacement Axial Piston Pump with Fast Control Response. The PVG is a variable-displacement, axial piston pump with fast control response. The PVG thrives on low viscosity fluids and is available in a variety of control and porting options. It is designed to be a high-performance solution for demanding applications. PVG open loop, axial piston hydraulic […]
-
-
-
-
PVK Series Pump
Variable Axial Piston Pump with Longitudinal Controls The PVK pump line consists of three sizes of variable-displacement, open-loop, axial-piston pumps. The PVK is unique from other variable pumps because it has longitudinally-mounted controls. It is recommended that legacy PVK pumps be replaced by the current PVG pump line. Available in two frame sizes and three […]
-
-
-
-
PVM Series Pump
A Versatile Pump with a Modular Design. The PVM line of variable-displacement, axial-piston pumps is designed to adapt to your most demanding applications. Virtually indestructible, the modular PVM open-loop, axial-piston hydraulic pumps offer advanced engineering at an affordable price. Computer-optimized and with multiple controls available, PVM pumps deliver high performance in a compact design. Available […]
-
-
-
-
PVV Series Pump
The Flagship, High-horsepower Variable Displacement Pump. The PVV line pumps represents the pinnacle of performance in a variable-displacement, axial-piston pump. Designed for power and speed, PVV open-loop, axial-piston hydraulic pumps by delivering the punch that is required for large, heavy-duty systems. Utilizing advanced engineering, the PVV pump line delivers up to 560 horsepower – four […]
-
-
-
-
SG102 Series Pump
Dump Pump, Gear Pump, 80 cc/rev, Displacement. The SG102 Dump Pump is part of the family of Commercial Hydraulics truck pumps. Building upon the technology of the industry standard C102/G102 pumps, the innovative SG102 Dump Pump provides a 37% faster-dumping cycle versus the standard G102. The pump is designed to fit where space is limited, […]
-
-
-
-
QX Series Pump
High Pressure Internal Gear Pump, 4,8 – 402,6 Displacement cm³/rev. The QX pumps are the 5th generation of internal gear pumps, which have proven themselves in thirty years of service around the world. The straightforward and rugged construction guarantees long service life without the need for extensive maintenance. Tandem and multiple pumps are available worldwide […]
-
-
-
-
QXEH Series Pump
Internal Gear Pump – up to 280 bar with One Gear Stage, 10,0 – 160,5 Displacement cm³/rev. Energy-efficiency and productivity for fixed – and variable-speed drives. The QXEH series consists of single-stage pumps for both constant and variable speeds. Thanks to the use of high-precision gear parts with a pinion shaft (pinion and shaft as […]
-
-
-
-
QXEM Pump
Internal Gear Unit for Motor/Pump Service, 5,1 – 248,8 Displacement cm³/rev. For applications requiring a variable-speed multi-quadrant operation, there is now a special version: The QXEM internal gear drive unit. The QXEM series consists of single-stage motors for constant and variable speeds. Thanks to the use of high-precision gear parts with a pinion shaft (pinion […]
-
-
-
-
QXM Pump
Internal Gear Unit for Motor/Pump Service, 5,1 – 498,5 Displacement cm³/rev. The QXM drive unit can be used in open- and closed-loop hydrostatic drives and can operate both as a pump and as a motor. This flexibility offers possibilities for various applications, one example being the raising and lowering of loads. The QXM works as a […]
-
-
-
-
QXP Metering Pump
Metering Pump for Polyurethane Production, 3,3 – 498,5 Displacement cm³/rev. The QXP is an internal gear pump for metering isocyanates, polyols, additives and other fluids. Combined with a variable-speed drive, the QXP is being applied very successfully as a metering pump in the production of polyurethane. The QXP’s simple and robust design makes this pump […]
-
-
-
-
QXV Pump
Internal Gear Pumps, For Low-Viscosity Fluids, 5 – 500 Displacement cm³/rev. The QXV is an internal gear pump for low viscosity. It can develop pressures of 250 bar with high efficiency at viscosity of around 1 mm²/s. The QXV is being used with great success to pump aviation jet fuels, paraffin oil/kerosene, brake fluids, Pentosin and […]
-
-
-
-
PVWC Series Pump
The Closed-loop Pump for Low-viscosity Fluids. Rugged and tough, PVWC closed-loop, hydrostatic, axial-piston hydraulic pumps offer low horsepower for high-performance applications. The PVWC pump combines quiet operation, high efficiency and competitive pricing in a compact design. Capable of operating with low-viscosity or other special fluids, and with excellent contamination resistance properties, PVWC pumps feature a […]
-
-
-
-
PVWJ Series Pump
Variable Displacement Cost-effective, Rugged Pump. The PVWJ is a variable-displacement, axial-pistol pump with medium control response. It thrives on low viscosity fluids and is available in a variety of control and porting options. The PVWWJ open loop, axial piston hydraulic pumps are uniquely designed for enhanced stability and less maintenance in low to medium horsepower […]
-
-
-
-
PVWW Series Pump
Variable Displacement Pump for Ultra Low-lubricity Applications. The PVWW line of pumps provides excellent variable-displacement pumping with fluids with a high water concentration. The PVWW is available with a variety of control modules. PVWW open-loop, variable-displacement, axial-piston hydraulic pumps are uniquely designed for low-lubricity, low-viscosity applications, such as pumping water-based, and environmentally-friendly fluids. Available in […]
-
-
-
-
T6*M Series Pumps
Mobile Hydraulic Vane Pump. The T6*M Series are Hydraulic mobile vane pumps that reduce size and cost of actuators, valves, and lines and extend working life, support by pressure ratings of up to 275 bar. Hydraulic mobile vane pumps are optimized for mobile applications The high-pressure design reduces installation costs and provides extended life at […]
-
-
-
-
T6CCZ Series Pump
Hydraulic Mobile Pump, For Cardan Mounting. Hydraulic mobile pump T6CCZ series is specially designed for Cardan mounting. The double row ball bearing and a needle bearing double the permissible radial load compare to standard version capability. The hydraulic mobile pump T6CCZ series reduces installation costs and provides extended life for Cardan mounting. The T6CCZ pump […]
-
-
-
-
HPZ PA2 Pumps
Gear Pumps, Silent, Aluminum, Displacement from 6,1 cm³/rev. up to 25,6 cm³/rev., Pressure up to 300 Bar. The HPZ PA2 gear pumps are specified with helical teeth and a special finishing process that significantly reduces hydraulic pulsation of the oil flow, resulting in lower noise levels and consequently recommending them as the best option for […]
-
-
-
-
T6GC Series Pump
Hydraulic Mobile Pump Take-off (PTO). The Hydraulic mobile pump T6G, T67G, and T6ZC series is specially designed for power take-off (PTO) mounting. The hydraulic pump T6G, T67G, and T6ZC series allows an extended life due to the reinforced bearing combined with the vane technology. The high-pressure capability up to 300 bar, in the small envelope, […]
-
-
-
-
T6H* Series Pump
Hybrid Pump, Utilizing Fixed Displacement and Piston Pump Variable Cartridge. The hybrid pump increases safety and better acceptance of working conditions by utilizing a combination of fixed displacement vane pump cartridges and a PV* piston pump variable cartridge. The Hybrid pump T6H* series are economical and offer a compromise between piston & vane technologies. The […]
-
-
-
-
K3V/K5V Series Pump
Open Loop Variable Displacement Axial Piston Pump The K3V/K5V Series are variable displacement axial piston pumps of swash plate design, suitable for use in mobile applications. Various rotary group layouts, tandem type with PTO and parallel type are available to respond to applications. The K3V/K5V Series has a high power density, high suction capability, wide […]
-
-
-
-
T7/T67/T6 Pumps
Hydraulic Industrial Fixed Displacement Vane Pumps. The T7/T67/T6 series fixed displacement hydraulic industrial vane pumps reduces installation costs and drives extended life due to their high-pressure capability, up to 320 bar in a small operating envelope and are optimized for industrial applications. The high-pressure design reduces installation costs and provides extended life at reduced pressure. […]
-
-
-
-
VP1 Series Pump
Axial Piston Variable Pumps, with Operating Pressure up to 6,100 psi. The VP1 hydraulic variable truck pump series has operating pressures up to 420 bar (6,100 psi) and speeds up to 3000 rpm. The VP1 pump is a robust design that provides circuit reliability for the most demanding truck applications. Sizes from 45 – 130cc. […]
-
-
-
-
0.25 – 0.5 Series Pumps
Internal Gear Pumps, For Low-Viscosity Fluids, 5 – 500 Displacement cm³/rev. The pumps 0.25 and 0.5 gear micropump usually consists of a gear pair supported by two aluminum bushes, a body, a securing flange and a cover. The shaft of the driving gear projecting beyond the flange mounts a twin – lip seal ring (the […]
-