Vane Motors

Vane Motor – High-Efficiency Solutions for a Variety of Industries, Capable of Providing Rotation in Either Direction, Provide Good Operating Efficiencies, Low-Cost.

All hydraulic motors operate by causing an imbalance which results in the rotation of a shaft. In a vane motor, this imbalance is caused by the difference in the vane area exposed to hydraulic pressure.

Vane motors provide good operating efficiencies, but not as high as that of the piston motor type with horsepower ratings that correspond.

Vane motors typically consist of a cartridge assembly of a motor housing. This design is very similar to a vane pump. Two-port plates separate the inlet and outlet ports as they sandwich the rotor and cam ring between them.

GSGR offers a wide variety of motors from well-known brands all with unique performance characteristics which are designed for superior, efficient system performance. Browse below to find an extensive range to choose from. Can’t find what you are looking for, the GSGR design team provides application assistance to determine the proper size and style of motor, contact us today to discuss your application needs.

• • 

  • M3B & M4* Series Motor

    Medium Duty Vane Motors For Severe Duty Applications, High-Pressure up to 230 bar, High-Speed up to 4000 RPM and Low Fluid Lubricity (HF-1, HF-2A, HF-3, HF-4, HF-5). TheM3B and M4* Bi-Directional Vane Motors have been specifically designed for long life in severe duty applications. Torque range (Nm) 102 to 567 (at 175 bar) with a […]

• • 

  • M4 Series Motor

    SAE 82 (A-Frame) 2-Bolt Side Mount, 2.45 – 12.29 cm³/rev (.15 – .75 in³/rev) Displacement, SAE Straight Thread Port Code/SAE 10 & 12, Long-Single-End Shaft, Speed Range 75 to 7500 RPM Up To 30 to 3000 RPM, Pressure 2000 PSI Continuous, 2400 PSI Intermittent, Max, 3000 PSI Transient, Max. The M4 high-speed hydraulic gerotor motor […]

• • 

  • Parker M5 Series

    Heavy Duty Fixed Displacement Vane Motor. The Parker M5 series is tailored for severe duty applications which require high pressure, high speed, and low fluid lubricity. Parker hydraulic vane motors M5 Series offer a very compact solution and, with their built-in valves, they turn into complete hydraulic cooling units, allowing optimal performances, time and money […]

• • 

  • Permco PM4C Series

    Small Displacement Vane Motor, 1.49-4.89 Displacement, Phosphate Coating, Wiper Built into Shaft Seal. The Permco PM4C Series vane motor is a small displacement vane motor 1.49 – 4.89, max rpm 3600, torque @ 24-75, rpm 3600, cam ring range 024-075.

• • 

  • PM4D Series Motor

    Medium to Large Vane Motor, 3.97- 8.81 Displacement, Cam Ring 062-138 Range. The PM4D Series vane motor is a medium to large frame size displacement vane motor 3.97 – 8.81, max rpm 3000, torque @ 2000 rpm 62-138, max psi of 2500.

• • 

  • PM4E Series Motor

    Large Displacement Vane Motor, 9.67-13.55 Displacement, Cam-Ring. The PM4E Series vane motor is a large displacement motor, with a Cam-Ring range of 153-214, max. psi 2500, max rpm 3000, torque range 153-214.