Hydraulic Filter Elements
-
-
-
BPS 1-30 Bypass Filters
BPS Bypass Filter can be used for OEM first fit applications as well as for retro-fitting. The filtration is done in a bypass configuration from the main hydraulic system. The BPS Filter Systems are available with one filter housing (BPS-1A, maximum flow 2.1 l/min / 0.6 US GPM) or with two filter housings (BPS-2A, maximum […]
-
-
-
-
BPS 2-30 Bypass Filters
BPS Bypass Filter can be used for OEM first fit applications as well as for retro-fitting. The filtration is done in a bypass configuration from the main hydraulic system. The BPS Filter Systems are available with one filter housing (BPS-1A, maximum flow 2.1 l/min / 0.6 US GPM) or with two filter housings (BPS-2A, maximum […]
-
-
-
-
DBE Desiccant Air Breather
The DBE Desiccant Air Breather is tested using the latest ISO and NFPA test procedures.It is subjected to cyclic pressure to verify rated fatigue and burst pressures per NFPA Standard T2.6.1. Statistically sampled elements are tested to ensure fabrication integrity in the manufacturing process. It is also tested for efficiency and dirt-holding capacity in a […]
-
-
-
-
Differential Pressure Gauge for In-Line Filters
A visual clogging indicator, the function of which is based on the differential pressure between the contaminated and clean side of the filter elements, is available as an option, and enables a convenient determination of the condition of the basket filter.
-
-
-
-
Differential Pressure Switch with Visual Gauge Indicator for In-Line Filters
The switch is used to indicate when the elements needs to be changed. The switch can turn on a light, shut down the machine or any further function controlled by an electrical signal. The gauge visually indicates the differential pressure across the filter elements.
-
-
-
-
Double Visual-Electrical Clogging Indicator for High Pressure Filter
The differential pressure indicator HI-D024 is a microprocessor controlled pressure switch with two alarm outputs for pre-alarm and shutoff. It is used to monitor the capacity of oil filters in oil-circulating systems. For this purpose, a microprocessor-controlled pressure sensor observes the dynamic pressure in front of the filter element or the differential pressure at the […]
-
-
-
-
GKC65 Filter
The GKC65 Filter is tested using the latest ISO and NFPA test procedures.It is subjected to cyclic pressure to verify rated fatigue and burst pressures per NFPA Standard T2.6.1. Statistically sampled elements are tested to ensure fabrication integrity in the manufacturing process. It is also tested for efficiency and dirt-holding capacity in a multi-pass test […]
-
-
-
-
GKL3 Filter
The GKL3 is tested using the latest ISO and NFPA test procedures.It is subjected to cyclic pressure to verify rated fatigue and burst pressures per NFPA Standard T2.6.1. Statistically sampled elements are tested to ensure fabrication integrity in the manufacturing process. It is also tested for efficiency and dirt-holding capacity in a multi-pass test stand, […]
-
-
-
-
GRTB Filter
The GRTB Filter is tested using the latest ISO and NFPA test procedures.It is subjected to cyclic pressure to verify rated fatigue and burst pressures per NFPA Standard T2.6.1. Statistically sampled elements are tested to ensure fabrication integrity in the manufacturing process. It is also tested for efficiency and dirt-holding capacity in a multi-pass test […]
-
-
-
-
HS60 Filter
The HS60 Filter is tested using the latest ISO and NFPA test procedures.It is subjected to cyclic pressure to verify rated fatigue and burst pressures per NFPA Standard T2.6.1. Statistically sampled elements are tested to ensure fabrication integrity in the manufacturing process. It is also tested for efficiency and dirt-holding capacity in a multi-pass test […]
-
-
-
-
NxTM TriMicron Element Series
The filter elements in the TriMicron series have been specially developed for the combined filtration of fine solid particle contamination, water and oil-ageing products from hydraulic and lubrication oils in the bypass flow. They are a combination of pleated and SpunSpray depth filter elements. The filter layers are produced using melt-blown technology (synthetic fibers).
-
-
-
-
OLS 1-30 Offline Filters
Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even if the main system is not in use. The […]
-
-
-
-
OLS 1-60 Offline Filters
Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even if the main system is not in use. The […]
-
-
-
-
OLS 2-30 Offline Filter
Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even if the main system is not in use. The […]
-
-
-
-
OLS 2-60 Offline Filters
Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even if the main system is not in use. The […]
-
-
-
-
OLS 4-30 Offline Filters
Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even if the main system is not in use. The […]
-
-
-
-
OLSH 1-30 & 1-60 Heated Offline Filters
System Units are characterized by their pre-heating unit and extremely efficient filter elements with a fineness of 0,5 micron. Specially designed for industrial hydraulic installations, the Offline Filters are available in single or multiple housing configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated […]
-
-
-
-
OLSW 1-30 Water Absorbing Offline Filters
Water Absorbing Filters are Offline Units that use special water absorbing Spin-On Filter Elements as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the STAUFF Micro Filter where final water removal takes place as well as solid removal […]
-
-
-
-
OLSW 1-60 Water Absorbing Offline Filters
Water Absorbing Filters are Offline Units that use special water absorbing Spin-On Filter Elements as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the Micro Filter where final water removal takes place as well as solid removal down […]
-
-
-
-
OLSW 2-30 Water Absorbing Offline Filters
Water Absorbing Filters are Offline Units that use special water absorbing Spin-On Filter Elements as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the Micro Filter where final water removal takes place as well as solid removal down […]
-
-
-
-
OLSW 2-60 Water Absorbing Offline Filters
Water Absorbing Filters are Offline Units that use special water absorbing Spin-On Filter Elements as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the Micro Filter where final water removal takes place as well as solid removal down […]
-
-
-
-
OLSW 4-30 Water Absorbing Offline Filters
Water Absorbing Filters are Offline Units that use special water absorbing Spin-On Filter Elements as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the Micro Filter where final water removal takes place as well as solid removal down […]
-
-
-
-
OLSW 4-60 Water Absorbing Offline Filters
Water Absorbing Filters are Offline Units that use special water absorbing Spin-On Filter Elements as a pre-filter. The fluid is pumped through the pre-filter which removes most water and larger solid contamination, in the second stage the fluid passes through the Micro Filter where final water removal takes place as well as solid removal down […]
-
-
-
-
REL Filter Elements
Stainless Steel basket screen filters are used as filter elements, which are designed for flow from the inside to the outside. Micron ratings ranging from 50 μm to 200 μm are available. Solid particles collected in the basket are prevented from reaching the clean side of the water cycle when being replaced. The filter element […]
-
-
-
-
Replacement Filter Element for Pressure Filters
The sensitive filter bellows on filter elements are frequently prone to damage during transportation, storage and filter replacement work. In addition, large particles in the flow of fluid may harm the filter material. The choice of the right filter material is dependent on different criteria. Among others, this includes the type of application, the filter […]
-
-
-
-
Replacement Filter Element for Spin-On-Filters
The sensitive filter bellows on filter elements are frequently prone to damage during transportation, storage and filter replacement work. In addition, large particles in the flow of fluid may harm the filter material. The choice of the right filter material is dependent on different criteria. Among others, this includes the type of application, the filter […]
-
-
-
-
Replacement Filter Element for Suction Strainers
The sensitive filter bellows on filter elements are frequently prone to damage during transportation, storage and filter replacement work. In addition, large particles in the flow of fluid may harm the filter material. The choice of the right filter material is dependent on different criteria. Among others, this includes the type of application, the filter […]
-
-
-
-
RF Return-Line Filters
RF Return-Line Filters are designed as tank top filters. They are mounted directly on the tank top and when 100% of the system’s oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed to return […]
-
-
-
-
RFA Return-Line Filters
RFA Return-Line Filters are a one piece design and can be used as a tank top or an in-line filter. They are mounted in the Return-Line and if 100% of the system oil is filtered, provide the optimum removal of contaminant for the systems. This provides the pump with clean oil, thus reducing contaminant generated […]
-
-
-
-
RFB Return-Line Filters
RFB Return-Line Filters are designed as tank top filters. They are mounted directly on the tank top and if 100% of the system oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. Because of it’s low weight and compact […]
-
-
-
-
RFS / RFS-D Return-Line Filters
RFS and RFS-D Carbon Steel Return-Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The […]
-
-
-
-
RTF-10/15/25 Return-Line Filters
The RTF-10/15/25 Return-Line Filters are designed as tank top filters with a maximum operating pressure of 3.4 bar / 49 PSI.
-
-
-
-
RTF-20 Return-Line Filters
RTF-20 Return-Line Filters are designed as tank top filters with a maximum operating pressure of 10 bar / 145 PSI and flow rates up to 115 l/min / 30 US GPM. The filter bowl is designed to return the oil beneath the surface thus preventing entrainment of air. RTF-20 series compact design and integral breather […]
-
-
-
-
RTF-40 Return-Line Filters
RTF-40 Return-Line Filters are designed as tank top filters with a maximum operating pressure of 6,9 bar / 100 PSI. The filter bowl is designed to return the oil beneath the surface thus preventing entrainment of air.
-
-
-
-
RTF-50 Return-Line Filters
RTF-50 Return-Line Filters are designed for tank top applications with a maximum pressure of 6,9 bar / 100 PSI. The filter bowl is designed to return the oil beneath the surface thus preventing entrainment of air. The RTF-58 elements interchange with the popular “K” series and RTF-59 elements interchange with the“RE-409” series elements.
-
-
-
-
RTF-N Return-Line Filters
RTF-N Return-Line Insert Filters allow for a choice of installation configurations which permits custom reservoir design with an in tank filtering system. The filters are installed semi-immersed or totally immersed into a reservoir. The filtration flow is from inside to the outside of the element which ensures that all the contaminant is collected inside the […]
-
-
-
-
SCFC-05/10 America Filtration Systems
These portable filter carts, (SCFC & SPFC models), are very complete and efficient units capable of off line filtration, filling or emptying reservoirs or any application requiring the transfer or filtration of hydraulic fluid. Multi stage filtration can be achieved to extend element life. Both units are available with a variety of different spin on […]
-
-
-
-
SF-65 Spin-On Filter Elements
SF-65-series Spin-On Elements are used with the SAF series Spin-On Filters.
-
-
-
-
SF-67 Spin-On Filter Elements
SF-67-series Spin-On Elements are used with the SSF-20L/100/120/120L/130/150/160/180 and SSF-24B/24N/24S/25B/25FM/25 Spin-On Filters.
-
-
-
-
SFC-35 / 36 and SFCT-35 / 36 Spin-On Filter Elements
SFC-35/36 series Spin-On Elements are used with the SSF-12 Spin-On Filters with G3/4 threaded ports. SFCT-35/36 series Spin-On Elements have an internal 1,7 bar / 25 PSI bypass and anti-drain back diaphragm for use with SSFT-12 and SSFT-12B Tank Top Spin-On Filters.
-
-
-
-
SFC-57 / 58 and SFCT-57 / 58 Spin-On Filter Elements
Spin-On Filter Elements of the SFC-/SFCT-57/58 series are used with SSF-20L/100/120/120L/130/160 and SSF-24B/24N/24S/25B/25FM/25 series Spin-On Filters F with G1-1/4 threaded ports. SFCT-57/58 series Spin-On Elements have an internal 1,7 bar / 25 PSI bypass and anti-drain back diaphragm for use with SSFT-20B/20 Tank Top Spin-On Filters.
-
-
-
-
SMFS-P-015 Europe Filtration Systems
Mobile Filtration Systems type SMFS-P-015 are designed to cover a wide application range in the area of offline-filtration. Being compact, powerful and robust the units assist the preventive maintenance, either when transferring fresh oils or purifying existing hydraulic and lubrication oil systems. By selecting high-quality components, the SMFS is suitable for purifying small and medium […]
-
-
-
-
SMFS-U-030 Europe Filtration Systems
Mobile Filtration Systems type SMFS-U-030 are designed to cover a wide application range in the area of offline-filtration. Being compact, powerful and robust the units assist the preventive maintenance, either when transferring fresh oils or purifying existing hydraulic and lubrication oil systems. By selecting high-quality components, the SMFS is suitable for purifying small and medium […]
-
-
-
-
SMFS-U-060 Europe Filtration Systems
Mobile Filtration Systems type SMFS are designed to cover a wide application range in the area of offline-filtration. Being compact, powerful and robust the units assist the preventive maintenance, either when transferring fresh oils or purifying existing hydraulic and lubrication oil systems. By selecting high-quality components, the SMFS is suitable for purifying small and medium […]
-
-
-
-
SMFS-U-110 Europe Filtration Systems
Mobile Filtration Systems type SMFS are designed to cover a wide application range in the area of offline-filtration. Being compact, powerful and robust the units assist the preventive maintenance, either when transferring fresh oils or purifying existing hydraulic and lubrication oil systems. By selecting high-quality components, the SMFS is suitable for purifying small and medium […]
-
-
-
-
SMFS-U-CM-110 Europe Filtration Systems
Mobile Filtration Systems type SMFS are designed to cover a wide application range in the area of offline-filtration. Being compact, powerful and robust the units assist the preventive maintenance, either when transferring fresh oils or purifying existing hydraulic and lubrication oil systems. By selecting high-quality components, the SMFS is suitable for purifying small and medium […]
-
-
-
-
SMFS-U-DL-015-G Europe Filtration Systems
Mobile Filtration Systems type SMFS are designed to cover a wide application range in the area of offline-filtration. Being compact, powerful and robust the units assist the preventive maintenance, either when transferring fresh oils or purifying existing hydraulic and lubrication oil systems. By selecting high-quality components, the SMFS is suitable for purifying small and medium […]
-
-
-
-
SMWV Mini Water Vac
The Mini Water Vac neither removes or alters oil additives. The water removal process is based on pure vacuum evaporation inside a vacuum chamber at a maximum temperature of +65 °C / +149 °F. Solid particle removal is achieved through a well proven Systems Micro Filter. The Mini Water Vac removes liquid, gas, and solid […]
-
-
-
-
SPFC Australia and New Zealand Mobile Filtration System
Mobile Filtration Systems type SPFC is designed to cover a wide application range in the area of offline-filtration. This is an essential tool for preventive maintenance, either when transferring new oils or purifying existing hydraulic and lubrication oil systems. The Stauff Portable Filter Cart type SPFC is a very complete and practical unit utilizing dual […]
-
-
-
-
SPFC-10 America Filtration Systems
These portable filter carts, (SCFC & SPFC models), are very complete and efficient units capable of off line filtration, filling or emptying reservoirs or any application requiring the transfer or filtration of hydraulic fluid. Multi stage filtration can be achieved to extend element life. Both units are available with a variety of different spin on […]
-
-
-
-
SRFL-S / D In-Line Filters
In-Line Simplex Filters SRFL-S and Duplex Filters SRFL-D are designed for in-line hydraulic applications. With its compact construction and the easy maintain assembly the SRFL-S and SRFL-D Filters are suitable for flow rates up to 7000 l/min / 1850 US GPM. The two housings of the Duplex Filter SRFL-D are connected with a special gate […]
-
-
-
-
SRFL-SW In-Line Filters
In-Line Filters SRFL-SW are specially developed for direct installation into the pipelines of industrial water cycles. Depending on their size, SRFL-SW filter housings are suitable for nominal flow rates up to 13330 l/min / 3521 US GPM at a maximum operating pressure of 16 bar / 232 PSI. The SRFL-SW have been designed to be […]
-
-
-
-
Type SBM Replacement Filter Elements – Multimantle Elements
Type SBM Multimantle Elements come in different types and sizes. Multimantle filter elements are generally used in marine applications for filtering fuels and lubricants as well as water. The elements are also used in the processing industry for purifying water, oils, coolants and chemicals.
-
-
-
-
Type SBS-124 Replacement Filter Elements for Paper, Fiberglass, and Polyester Elements
Due to the pleated design of the Type SBS-124 Paper Elements, they can offer a large filter area in a small place and with a long durability. The cover made of Polyester allows a safe treatment during the installation and the demounting without damaging the filter media.
-
-
-
-
Type SF High Pressure Filters
SF series High Pressure Filters are designed for in-line hydraulic applications, with a maximum operating pressure of 420 bar / 6,000 PSI. A high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs.
-
-
-
-
Type SF-TM High Pressure Filters
SF-TM series High Pressure Filters are designed for manifold block mounting hydraulic applications, with a maximum operating pressure of 315 bar / 4,560 PSI. A high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs.
-
-
-
-
Type SFA Medium Pressure Filters
SFA series Medium Pressure Filters are designed for in-line hydraulic applications with a maximum operating pressure of 160 bar / 2,320 PSI. A high efficiency of contamination removal is assured. The dirt-hold capacity of the elements ensures long service life, and as a result, reduced maintenance costs.
-
-
-
-
Type SFK Replacement Filter Elements for Single, Double, and Automatic Filters
High-quality Screw-In and Plug-In Elements in Stainless Steel or in Plastic are designed to fit into the most common single, double, and automatic filters.
-
-
-
-
Type SFK-439 Replacement Filter Elements for Heavy Fuel Element
The Type SFK-439 Heavy Fuel Elements separate particles from the fluid flow as the last filtration step before direct injection to the engine room / combustor.
-
-
-
-
Type SFZ High Pressure Filters
SFZ series High Pressure Filters are designed for sandwich plate mounting in manifold block mounting hydraulic applications, with a maximum operating pressure of 315 bar / 4,560 PSI. A high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs.
-
-
-
-
Type SMPF Medium Pressure Filters
SMPF Medium Pressure Filters are designed for in-line hydraulic applications with a maximum operating pressure of 110 bar / 1,600 PSI. Used together with STAUFF Filter Elements, a high efficiency of contamination removal is assured.
-
-
-
-
Types SFK-320 and SFK-445 Replacement Filter Elements for Plastic Elements
The Types SFK-320 and SFK-445 Plastic Elements have a special cloth and a special format which ensure the safety and the optimal protection of the motors. The molded end caps allow a quick installation and demounting as they can be easily connected.
-
