Products > Hydraulics > Filters and Filtration > Fluid Condition Monitoring

Fluid Condition Monitoring

- Accumulator Adaptor: Type SBAA / SDAA
  
  The STAUFF Accumulator Adaptor together with the PT-RF pressure sensors allow maintenance personal to quickly and easily check the accumulator pressure without pressure loss. Pressure values, serial numbers, date and time will automatically be stored in the memory of the reader and then easily and conveniently read out on the PC later on. For this, […]
- AKS | AKD Air-Operated Kidney Loop Systems
  
  Schroeder offers a kidney loop filtration system with a pneumatic motor in place of the standard electric motor. The pneumatic motor offers the same flow capability using the same components, but without the need for an electrical outlet. This provides a major advantage in the application of this unit. With no need for an electrical […]
- AMFS Asset Management Filtration Station
  
  The Asset Management Filtration Station® (AMFS) is a complete fluid management system designed to manage fluid cleanliness, so that the greatest return of that asset is achieved. The AMFS is an all-in one system that monitors your fluid condition, filters out contaminants and tracks all the necessary data needed for trend analysis and record keeping […]
- AMS | AMD Air-Operated Mobile Filtration Systems
  
  AMS and AMD carts feature a pneumatic motor in place of the standard electric motor. The pneumatic motor offers the same flow capability using the same components, but without the need for an electrical outlet. This provides a major advantage in the application of this unit. With no need for an electrical outlet, it is […]
- AS AquaSensor
  
  The AS sensors are online saturation and temperature sensors for the monitoring of hydraulic and lubrication fluids accurately and continuously. They measure the water content relative to the saturation concentration (saturation point) and outputs the degree of saturation (saturation level) in the range of 0 to 100% as a 4 to 20 mA signal. A […]
- Bottle Sampling Unit: Type Bottle-Sampler-LasPaC-II
  
  If a direct particle count on your system is not possible, the LasPaC-II bottle sampler units allow you to take measurement samples for analysis at a later time. STAUFF offers two sizes of bottle sampling units for the LasPaC-II devices: the 110 ml and the 500 ml units. The 110 ml unit is supplied in […]
- CAN Flow Turbine: Type Flow-meter-PPC-CAN-SFM
  
  The CAN Flow Turbine Flow-meter-PPC-CAN-SFM is specially designed for the use with the CAN Hydraulic Testers and has to be installed permanently in the pipeline where the oil flow rotates the internal axial turbine.
- CAN Frequency Converter
  
  The Frequency-converter-PPC-CAN can be used to connect frequency signals (e.g. from turbines, flow counters or tachometers) to the PPC-Pad or PPC-04-plus-CAN. The instruments can process sinus and rectangle signals from 1 Hz to 5 KHz with signal amplitude from 20 mV to 10 V. Configuration is possible via USB and PC software.
- CAN Pressure / Temperature Sensor: Type Sensor-PPC-CAN-PT
  
  The CAN Pressure / Temperature Sensor-PPC-CAN-PT are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display […]
- CAN Pressure Sensor: Type Sensor-PPC-CAN-P
  
  The CAN Pressure Sensor-PPC-CAN-P are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure Sensors. Due their sturdy Stainless Steel design, the quick response times (< 1 ms) […]
- CAN Temperature Sensor: Type Sensor-PPC-CAN-T
  
  The CAN Temperature Sensor-PPC-CAN-T are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. The Sensor-PPC-CAN-T is compatible with the CAN Flow Turbine Flow-meter-PPC-CAN- SFM and the Straight Threaded Joint SGV-16S-G-W3 (only process connection M10x1). Due their sturdy […]
- Complete System: Type PT-RF-SET
  
  The PT-RF-SET complete system is compiled in different versions according to customer requirements. All complete systems are supplied in a handy carrying case containing individually shaped foam inserts for a maximum of 10 pressure transmitters and 10 process connection adaptors.
- Complete Systems for Analog Hydraulic Testers PPC-04/06/-8-plus
  
  Complete systems for analogue Hydraulic Testers are assembled in different versions according to customer wishes. The complete systems are supplied in a handy case with individually designed pockets/sections and have space for the components listed below.
- Complete Systems: Type PPC-04-CAN-SET
  
  Complete Systems for Hydraulic Testers PPC-04-plus-CAN are assembled in different versions according to customer wishes. The complete systems are supplied in a handy case with individually designed pockets/sections and have space for the components listed below.
- Complete Systems: Type PPC-Pad-SET
  
  The PPC Pad is also available in a special designed case to store your unit and your accessories. The case is robust, lightweight and can be carried directly to your machine. It has individually designed inserts that can hold up to 4 Pressure Sensors, 1 CAN Flow Turbine, 1 Flow Turbine, 1 Frequency- and 1 […]
- CS 1000 Contamination Sensor
  
  The CS 1000 provides the user with a smaller, tougher, and more versatile stationary sensor. It provides instantaneous readings and is able to self-diagnose continuously with error indication via the status LED. The attractive cost-to-performance ratio makes it especially applicable for OEM applications. Online, real-time condition monitoring allows you to have total predictive maintenance.
- CSI-C-11 ConditionSensor Interface
  
  The ConditionSensor Interface CSI-C-11 is used to transmit digital sensor signals into a network protocol (HSI TCP/IP or Modbus® TCP), which can be transmitted to a stationary or mobile device via network cable (LAN) or wireless connection (W-LAN). Moreover, the CSI-C-11 is equipped with an internal memory and can be used as a data logger.
- CSM 1000 Contamination Sensor Module
  
  The Contamination Sensor Module is an online condition monitoring system for detecting particle contamination in hydraulic and lubrication fluids containing a high proportion of air bubbles. The CSM 1000 is ideal for many applications including, but not limited t, lubrication systems in paper, steel, and energy sectors and preventative, pro-active preparation of service/intervals.
- CTU TestMate Contamination Test Unit
  
  The CTU 1000 was developed due to increased demand for system cleanliness and for monitoring and optimizing the cleanliness, of smaller components during production, storage and system assembly. By determining the type, size and quantity of the contamination, quality standards can be checked and documented and the necessary steps towards optimization can be taken.
- EPK EasyTest Series
  
  The EPK from Schroeder provides the necessary tools to determine level of solid particulate contamination present in a particular fluid sample. The kit is named for the patch method used to visually assess the amount of solid contaminants and can perform quick, on-site determination of contamination level of solid particulate and acts as a supplement […]
- ET-100-6 TestMate Series
  
  The sensor and EasyTest fittings are robust units designed to operate safely at any system pressure up to the maximum 6000 psi that the sensor load valve is capable of generating. Pressure bearing parts are thick section aluminum extrusions carefully chosen for their combination of high strength and light weight.
- FCU Fluid Control Units – Portable Models
  
  The FCU is a portable service unit and is designed for measurement of solid particle contamination and water saturation in hydraulic systems. It is designed for temporary operation up to a maximum of 30 minute runtime followed by a rest period of 10 minutes and is not intended for continuous operation. The FCU will measure […]
- Flow Indicator: Types SDM / SDMKR
  
  Analogue flow indicators for measuring the flow rate of fluids in mobile and industrial hydraulics. The SDMKR is designed with a loading valve for the strain test of the hydraulic system to facilitate precise control of the operating pressure. In addition, this product can also be subjected to a reverse flow direction (without flow rate […]
- Flow Turbine: Type Flow-meter-PPC-04/12-SFM
  
  The Flow-meter-PPC-04/12-SFM Flow Turbine is permanently installed in the pipeline. The oil flow rotates the internal axial turbine. The frequencies generated are processed by digital electronics (a signal converter). Interferences caused by flow effects are compensated by this process. The signal converter is now directly integrated into the Flow Turbine. This allows even simpler operation […]
- FS Filtration Station
  
  The Filtration Station® (FS) is capable of flushing, filtering, and monitoring ISO cleanliness with user-defined, automatic features. The FS is designed to transfer fluid through two (2) K9 filters in series for staged particulate or water/particulate removal. The FS is always furnished with two filter housings. Both filters are top-loading and include element indicators in […]
- HMG 2500 TestMate Series
  
  Automated setting procedures, a simple, self-explanatory operator guide and many comprehensive functions ensure the operator is able to carry out a wide range of measurement tasks within a very short time. This makes the HMG 2500 an ideal companion for employees in maintenance, commissioning and service.
- HMG 4000 TestMate Series
  
  The HMG 4000 hand–held measuring unit is a portable measuring and data logging device. It was mainly developed for all values measured in relation with hydraulic systems, such as pressure, temperature, flow rate and position. Moreover, it provides a very high flexibility, even when it comes to evaluating other measuring values. The main applications are […]
- HY-TRAX Communications Module
  
  The HY-TRAX Communications Module provides remote visibility to the fluid condition of critical systems via the Internet and smart devices displaying fluid particle counts, temperature, and percent water saturation levels on a customizable dashboard. The Communications Module components are mounted and housed in a rugged IP 40 enclosure.
- HY-TRAX Communications Module with Remote Controlled Sampling System
  
  The HY-TRAX Communications Module with Remote Controlled Sampling System provides remote visibility to the fluid condition of critical systems. It features a micro Variable Speed Drive and a pump/motor provides optimal flow for accurate sensor readings in variable conditions and a flow control valve providing optimal pressure for accurate sensor readings.
- HY-TRAX Fluid Sampling Manifold with Communications Module and VSD Pump/Motor
  
  The HY-TRAX Fluid Sampling Manifold with Communications Module and VSD Pump/Motor provides remote visibility to the fluid condition of critical systems. It features a micro Variable Speed Drive and a pump/motor provides optimal flow for accurate sensor readings in variable conditions.
- HY-TRAX Fluid Sampling System Manifold with Contamination Sensor and VSD Pump/Motor
  
  The HY-TRAX Fluid Sampling System Manifold with Contamination Sensor and VSD Pump/Motor is designed to be used with a communications module and optional water sensor. It features a micro Variable Speed Drive and a pump/motor provides optimal flow for accurate sensor readings in variable conditions.
- HY-TRAX Fluid Sampling System Manifold with Manual Controller and VSD Pump/Motor
  
  The HY-TRAX Fluid Sampling System Manifold with Manual Controller and VSD Pump/Motor provides local visibility to the fluid condition of critical systems. It features a micro Variable Speed Drive and a pump/motor provides optimal flow for accurate sensor readings in variable conditions. The compact design allows for installations with tight space constraints.
- HY-TRAX Manually Controlled Fluid Sampling System
  
  The HY-TRAX Manually Controlled Fluid Sampling System provides local visibility to the fluid condition of critical systems. It features a micro Variable Speed Drive and a pump/motor provides optimal flow for accurate sensor readings in variable conditions. The compact design allows for installations with tight space constr
- HY-TRAX Retrofit System Assembly
  
  Predictive maintenance has never been more convenient. The HY-TRAX® Retrofit System Assembly adds contamination monitoring abilities to our MFS, MFD, KLS and KLD Offline Filtration Systems. This kit allows for the integration of the TestMate® Contamination Monitor (TCM) and TestMate® Water Sensor (TWS) to accurately measure particle counts, relative humidity and temperature of the fluid […]
- Hydraulic Tester: CAN Accessories
  
  To connect the CAN bus sensors to the CAN Hydraulic Testers are different cable lengths are available, depending on customers requirements. The CAN sensors work on a bus system as displayed in the connection overview on page 32. All connections are 5-pin SPEEDCON connection plugs.
- Hydraulic Tester: Type PPC-Pad
  
  The hand-held measuring instrument PPC Pad helps you to deal with these new trends. It has never been so easy to follow the complex processes in these sectors with measurement, display and analysis. Potential uses include preventative maintenance, commissioning, troubleshooting and machine optimization. The expanded requirements of these modern applications (such as the increased number […]
- Hydraulic Tester: Type PPC-Pad-Display
  
  The hand-held measuring instrument PPC Pad helps you to deal with these new trends. It has never been so easy to follow the complex processes in these sectors with measurement, display and analysis. Potential uses include preventative maintenance, commissioning, troubleshooting and machine optimization. The expanded requirements of these modern applications (such as the increased number […]
- Hydraulic Testers: Type PPC-04-plus / PPC-04-plus-CAN
  
  The Hydraulic Testers are available in two versions. The PPC-04-plus, analogue version, comes with two inputs for connecting up to two analogue sensors at the same time. The PPC-04-plus-CAN comes with an CAN interface for connecting up to three digital sensors at the same time. Both versions provide automatic sensor recognition, thus making the tedious […]
- Hydraulic Testers: Type PPC-06-plus / PPC-08-plus
  
  The PPC-06/08-plus Hydraulic Testers have been especially developed for the growing demands of system monitoring and troubleshooting in hydraulic and pneumatic systems. The individual PPC-06-plus and PPC-08-plus Hydraulic Testers differ in the number of sensor inputs (3-channel or 4-channel technology). Both Hydraulic Testers can measure, store and process all relevant hydraulic parameters such as pressure, […]
- Interface Module with USB or Ethernet Interface: INTERFACE-LPM-II-USB/ETH
  
  The LPM-II-plus is connected to an EDP system or a laptop/PC using an interface module with a USB or an Ethernet interface. Either interface module is connected to the LPM-II-plus using a connecting cable (3 m / 9.84 ft). With the power supply unit connected, the LPM-II-plus is supplied with current via the connecting cable. […]
- IXU Ion Exchange Unit
  
  This easy to service ion exchange unit of the IXU series is used for conditioning flame resistant, HFD-R-based hydraulic and lubrication fluids. They effectively remove acidic products of decomposition caused by hydrolysis and/or oxidation of the fluid.
- Laser Particle Counter: Accessories
  
  An optional Screen Filter is available for heavily contaminated systems. The filter device is assembled directly to the supply line and allows particle counts in ambient conditions where normally the contamination is too high for a reliable test.
- Laser Particle Counter: Type LasPaC-II-M (Mobile)
  
  The LasPaC-II-M is a highly accurate laser particle counter that is designed for application where it is necessary to have a small, light, and robust service unit.
- Laser Particle Counter: Type LasPaC-II-P (Portable)
  
  The LasPaC-II-P (Portable) is the most complete way to measure the contamination level of your system. With the LasPaC-II-P you have the ability to measure, analyze and document your results immediately without the need of any additional equipment.
- Lubrication Condition Sensor: LubCos H2O+II
  
  The LubCos H2O+II Lubrication Condition Sensor is a stationary screw-in sensor for continuous determination of the oil condition, humidity, and temperature in hydraulic and lubricating oils. The sensor records the following physical oil characteristics as well as its periodic change: Temperature, relative oil humidity and water activity resp., relative dielectric number (relative permittivity) and conductivity […]
- MCMS-2000
  
  The MachineConditionMonitoring System MCMS 2000 is a condition monitoring system that specially tailored to the requirements of industrial gearboxes and stationary hydraulics systems with auxiliary power units mounted on roller bearings (e.g. pumps, electric motors). Thanks to the simultaneous measurement of fluid, vibration and process parameters, imminent damage can be detected early and unplanned system […]
- MCS Metallic Contamination Sensor Series
  
  The Metallic Contamination Sensor MCS 1000 detects metallic solid particle contamination in lubrication fluid. The particles are determined according to the inductive measurement process, in which a coil system is the key element of the sensor. Metallic particles (ferromagnetic Fe and nonferromagnetic nFe) in the > 70 μm size range are detected. The MCS 1000 […]
- MCS Metallic Contamination Sensor Series
  
  The Metallic Contamination Sensor Series detects metallic solid particle contamination in lubrication fluid. The particles are determined according to the inductive measurement process, in which a coil system is the key element of the sensor. There are three models to choose from as the MCS 1000 continuously monitors the status of the system and gives […]
- MFD-MV Medium Viscosity Mobile Filtration Systems
  
  The MFD-MV is a compact, self-contained filtration system equipped with high efficiency high capacity elements capable of removing particulate contamination and/or water quickly, conveniently and economically. It is perfect for cleaning up existing systems as well as for prefiltering new fluids, since new fluids often have contamination levels significantly higher than that recommended for most […]
- Oil Condition Sensor: Type OCS-I-M-B08-M16
  
  The Oil Condition Sensor OCS is designed for continuous monitoring of hydraulic systems. Permanently installed in the system the OCS sensor monitors the condition of hydraulic fluids and lubricating oils in real time, whereby water ingress and oxidation can be detected in time. The OCS sensor is 60 times more sensitive than dielectric sensors on […]
- Oil Sampling Kit: Type SFSK-1/-2
  
  Fluid analysis is a crucial component of any oil management program. Early detection of potential problems can prevent costly repairs and downtime. STAUFF SFSK oil analysis kits provide the tools to take a sample from a STAUFF test coupling or directly from a reservoir or sump. For this the supplied hose is directly connected to […]
- Particle Monitor: LPM-II CX
  
  The ATEX version of the Particle Monitor LPM-II is approved for use in hazardous areas (zone 2 / category 3G). The device thus meets the conditions to be used in e.g. oil and gas industry or chemical and process industry.
- Particle Monitor: LPM-II-plus
  
  The LPM-II-plus Particle Monitor determines the contamination level of the measured fluid on eight size channels and offers precise and complete determination of particle sizes in accordance with international standards. The LPM-II-plus is an automatic, optical particle counter with high-performance LEDs that work on the light obscuration principle. STAUFF recommends recalibrating the measuring equipment at […]
- Pressure Sensor: Type Sensor-PPC-04/12-P
  
  The Pressure Sensor-PPC-04/12-P can be used with all analog Hydraulic Testers of the PPC series, due to their 5-pin connection. Due their sturdy Stainless Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% Full Scale typ.) with automatic sensor recognition, the Pressure Sensors are a reliable and flexible solution for […]
- Pressure Test Kit (Analog): Type SMB-20 / SMB-15
  
  In addition to the individual SPG gauges, the STAUFF Pressure Gauges are also available as part of a pressure test kit. The SMB Pressure Test Kits are assembled in various versions, in accordance with customer wishes. All pressure test kits are supplied in a handy case with custom-designed foam inserts. Custom kits available upon request.
- Pressure Test Kit (Digital): Type SMB-DIGI
  
  In addition to the individual SPG-DIGI devices, the STAUFF Digital Pressure Gauges are also available as part of a pressure test kit. The SMB-DIGI pressure test kits are assembled in various versions, in accordance with customer wishes. All pressure test kits are supplied in a handy case with custom-designed foam inserts.
- Pressure Transmitter: Type PT-RF
  
  The pressure transmitters from the PT-RF series are integrated into fluid technology plants and systems permanently or temporarily using the appropriate process connection adapters. The energy required for a measurement is transferred to the pressure transmitter via the antenna of the reading device using wireless RFID technology. This means that the pressure transmitters require neither […]
- RBSA: Reservoir Breather Fluid Sampling Adapter
  
  The RBSA is a drop-in reservoir breather retrofit for fluid sampling provides clean, easy access to the reservoir through the existing breather part. This adapter is an easy fluid quality sampling solution for some suction and return ports and is valid in all applications with a hydraulic reservoir utilizing a 6-bolt mounting connection.
- Reader: Type Reader-PT-RF
  
  The hand-held readers transfer the energy required for a measurement to the pressure transmitter using RFID technology. All that is required is a maximum distance of 1.5 cm / 0.6 in from the antenna to the tip of the pressure transmitter for the duration of the measurement. When the pressure transmitter is activated by the […]
- RFSA Reservoir Filtration System Adapter
  
  The RFSA is an aluminum adapter that gives a kidney loop filter access to a reservoir. It accommodates kidney loop filtration rates up to approximately 15 GPM. The suction and return downtubes are included and are recommended to be cut to length and bent for proper fluid turnover in a reservoir.
- Rotational Speed Sensor: Type Sensor-PPC-04/12-SDS-CAB
  
  The Sensor-PPC-04/12-SDS-CAB Rotational Speed Sensor allows non-contact speed measurement of rotating components. The sensor is based on a opto-electrical measurement principle that determines the rotational speed with high- accuracy using a reflecting strip on the shaft. The contact rotational speed measurement is obtained by using a Contact Adaptor that is mounted to the sensor, and […]
- SLTS Level-Temperature Switch
  
  The Level-Temperature Switches (SLTS Series) are unique in their design and modularity. One of the greatest advantages is the ability of the end-user to adjust the switching level. The internal support wire carrying the level and temperature switches makes it a simple and quick job to change the level switch position.
- SMU Sensor Monitoring Unit
  
  The Sensor Monitoring Unit SMU1200 is a display unit for fluid sensors and is designed to display and store measured data. Combinations of fluid sensors can be connected directly such as the Contamination Sensor TCM and water sensor TWS-C or the Metallic Contamination Sensor TMS and water sensor TWS-C.
- SNA Level Gauge
  
  Type SNA Level Gauge features visual fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI. It comes in seven nominal sizes and can display either undivided or subdivided by strut(s) into two or three sections.
- SNA/SNK Level Gauge
  
  Type SNA/SNK Special Options Level Gauge features visual fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI. It is ideal for custom applications in terms of reservoir capacities and dimensions. It has a robust design thanks to one or more struts that subdivide the display into two […]
- SNK Level Gauge
  
  Type SNK Level Gauge features visual /electrical fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI. It comes in seven nominal sizes and can display either undivided or subdivided by strut(s) into two or three sections.
- SNKK Compact Level Gauge
  
  Type SNKK Compact Design Level Gauge features visual /electrical fluid level indication in hydraulic reservoirs with maximum tank pressures not exceeding 2 bar / 29 PSI. It comes in six nominal sizes and can display either undivided or subdivided by strut(s) into two or three sections.
- Temperature Sensor: Type Sensor-PPC-04/12-T
  
  The Screw-in Temperature Sensor-PPC-04/12-T measure current temperature directly in the pipeline and are compatible with the Flow Turbine Flow-meter-PPC-04/12-SFM and the Straight Threaded Joint SGV-16S-G-W3 (only process connection M10x1). The Rod-type Temperature Sensor-PPC-04/12-TSH is especially designed to determine the media temperatures in tanks and containers.
- Total Fluid Life
  
  The Schroeder Pro: Total Fluid Life is a state-of-the-art portable service unit, designed to provide invaluable, real-time insight into the health of synthetic oils, organic oils, mineral oils, and diesel fuel. This insight helps fluid users make informed decisions with regard to fluid replacement and treatment planning. Check out the video below to learn more […]
- TS Thermo Switch
  
  Type TS Thermo Switch features fluid temperature measurement in conjunction with Level Gauges SNA, SNK, and SNKK.
- TS-SNA/SNK-PT100 Temperature Sensor
  
  Type TS-SNA/SNK-PT100 Temperature Sensor features fluid temperature measurement in conjunction with Level Gauges SNA, SNK, ad SNKK. For analysis of signals with required equipment, simply connect to your on board control unit or PLC.
- TS-SNA/SNK-PT100-T Temperature Sensor
  
  The TS-SNA/SNK-PT100-T Temperature Sensor with Direct Installation Set features direct fluid temperature measurement without Level Gauges SNA, SNK, and SNKK; Analysis of signals with required equipment, simply connect to your on board control unit or PLC.

Controls		Hydraulics
Camera Systems Circuit Protection – Breakers Connectivity Solutions Diagnostics and Condition Monitoring (CM) Displays Electronic Foot Pedals Industrial Drives Input/Output Modules (I/O) IQAN System Products and Software by Parker Hannifin	Joystick Controls Master Control Modules Programmable Logic Controllers (PLC) Programmable Logic Relays (PLR) Radio Remote Controls Remote Monitoring and Telematics Sensors and Transducers Switches and Switch Panels	Accessories Accumulators Coolers Cylinders and Actuators Filters and Filtration Gearbox and Brakes	Hydrostatic Transmissions Motors Power Units Pumps Valves

Fluid Condition Monitoring

GS Global Resources

Certifications

Helpful Links

Stay Up To Date