Diagnostics

GS Global Resources Offers a Wide Range of Diagnostic Products That Offer Easy and Accurate Troubleshooting for Your Hydraulic Applications.

Contamination Control Program that includes the diagnostic services including fluid sampling and laser particle counting products needed to monitor system contamination levels.

Fluid analysis is a crucial element of any oil management program. Early detection of system contamination can prevent costly repairs and downtime.

With measuring, testing, display, and analysis devices and equipment from, system operators, maintenance personnel and repair technicians can determine and monitor the essential parameters in mobile and industrial hydraulics:

• Operating Pressure
• Maximum Pressure
• Differential Pressure
• System Temperature
• Volume Flow
• Contamination
• and much more

The range includes analog and digital pressure gauges that are either supplied individually or as part of practical pressure test kits including the required connection adaptors and accessories, as well as high-performance hand-held hydraulic testers.

Looking for assistance, Contact Us here.

• • 

  • AS AquaSensor

    The AS sensors are online saturation and temperature sensors for the monitoring of hydraulic and lubrication fluids accurately and continuously. They measure the water content relative to the saturation concentration (saturation point) and outputs the degree of saturation (saturation level) in the range of 0 to 100% as a 4 to 20 mA signal. A […]

• • 

  • CS 1000 Contamination Sensor

    Formally known as “TCM – TestMate Series”, the Contamination Sensor 1000 (CS 1000) continuously measures solid contamination in hydraulic fluid. Designed for connection to hydraulic and lubrication lines with pressures up to 5,075 psi (350 bar) and viscosities up to 4,635 SUS (1000 cSt). The CS 1000 provides the used with a smaller, tougher, and […]

• • 

  • CSI-C-11 ConditionSensor Interface

    The ConditionSensor Interface CSI-C-11 is used to transmit digital sensor signals into a network protocol (HIS TCP/IP or Modbus® TCP), which can be transmitted to a stationary or mobile device via network cable (LAN) or wireless connection (W-LAN). The CSI-C-11 is equipped with an internal memory and can be used as a data logger. For […]

• • 

  • CSM 1000 Contamination Sensor Module

    The Contamination Sensor Module (CSM) is an online condition monitoring system for detecting particle contamination in hydraulic and lubrication fluids containing a high proportion of air bubbles. Air bubble suppression is used to dissolve the air bubbles so that they are not detected as particles. Moreover, it is the ideal solution for analyzing the particle […]

• • 

  • HY-TRAX Communications Module

    The HY-TRAX Remote Oil Contamination Communications Module allows remote access via the Internet and smart devices to fluid particle counts, temperature and percent water saturation levels (optional) displayed on a customizable dashboard. The Communications Module collects and transmits data via GSM cellular at scheduled intervals. Users can receive alerts via email or text when the […]

• • 

  • HY-TRAX Communications Module with Remote Controlled Sampling System

    The HY-TRAX Communications Module with Remote Controlled Sampling System provides local visibility to the fluid condition of critical systems and includes an integrated micro VSD (Variable Speed Drive) and the pump/motor provides optimal flow for accurate sensor readings in variable conditions. This remote oil contamination sensor package allows remote access via the internet and smart […]

• • 

  • HY-TRAX Fluid Sampling Manifold with Communications Module and VSD Pump/Motor

    The HY-TRAX Fluid Sampling Manifold with Communications Module and VSD Pump/Motor has an integrated micro VSD (Variable Speed Drive) and the pump/motor provides optimal flow for accurate sensor readings in variable conditions. The Communications Module automatically controls fluid flow to compensate for viscosity changes due to temperature or fluid type.

• • 

  • HY-TRAX Fluid Sampling System Manifold with Contamination Sensor and VSD Pump/Motor

    The HY-TRAX Fluid Sampling System Manifold with Contamination Sensor and VSD Pump/Motor has an integrated micro VFC (Variable Speed Drive) and the pump/motor provides optimal flow for accurate sensor readings in variable conditions. It has a rugged design for field use, 50 psi maximum working pressure, plugged water sensor port (G3/8), flow control valve, and […]

• • 

  • HY-TRAX Fluid Sampling System Manifold with Manual Controller and VSD Pump/Motor

    The HY-TRAX Fluid Sampling System Manifold with Manual Controller and VSD Pump/Motor provides local visibility to the fluid condition of critical systems. It includes a micro VSD, Variable Speed Drive, and the pump/motor provides optimal flow for accurate sensor readings in variable conditions. This is designed to be used with TestMate® contamination monitor and optional […]

• • 

  • HY-TRAX Manually Controlled Fluid Sampling System

    The HY-TRAX Manually Controlled Fluid Sampling System provides local visibility to the fluid condition of critical systems and includes an integrated micro VSD (Variable Speed Drive) and the pump/motor provides optimal flow for accurate sensor readings in variable conditions.

• • 

  • MCS Metallic Contamination Sensor Series

    The Metallic Contamination Sensor MCS 1000 detects metallic solid particle contamination in lubrication fluid. The particles are determined according to the inductive measurement process, in which a coil system is the key element of the sensor. Metallic particles (ferromagnetic Fe and nonferromagnetic nFe) in the > 70 μm size range are detected. The MCS 1000 […]

• • 

  • Reservoir Breather Sampling Adapter

    The RBSA, Reservoir Breather Sampling Adapter, is a drop-in reservoir breather retrofit for fluid sampling provides clean easy access to the reservoir through the existing breather part and it provides easy fluid quality sampling solution for HY-TRAX and TMU suction and return ports.