Controls

Hydraulics

Input/Output Modules (I/O)

Functionality & Performance that is Adaptable & Intelligent.

GS Global Resources (GSGR) I/O controllers vary in capacity and functionality, making it easy to integrate into your application. They can expand the capabilities of your vehicle control system with a wide range of programmable, CAN based I/O Expansion Modules. GSGRs modules are compliant with CAN/J1939, CAN-Open, and ISO 11783. Our input/output modules can be easily integrated with our switch panels to provide and easier and safer application.

Can’t find what you are looking for? Contact us today to discuss your questions or application needs with our design team.

 

    • CAN RC-FLEC Series

      Flexible Electrical Center Configurable Power Distribution Module Designed for main primary power distribution, the RC FLEC (Flexible Electrical Center) centralizes power distribution, protection and control in a compact, sealed easy to install unit. The RC FLEC can be application configured providing a total system drop in solution. Integral Printed Circuit Board (PCB) allows for active […]

    • CM0410 Module

      J1939 Slave Controller Module, J1939 Protocol Over A CAN-Bus Connection, 4 Inputs, 10 Outputs. The CM0410 controller module is a compact J1939 slave unit that features configurable I/O using a supplied PC tool. The main function of the CM0410 module is to provide a means of controlling mechanical relays or low current loads via messages […]

    • GSGR XIO2 Cinch Small Enclosure Module

      24 Inputs, 8 Outputs, J1939 I-O Expansion Module. The GS Global Resources’  XIO2 Cinch SE (small enclosure) is a printed circuit board CAN-bus I/O module for applications that require multiple analog and digital inputs, as well as digital outputs. This module is designed to be a node on a CAN-bus, operating at 250 kbps with […]

    • GSGR XIO2 Hourglass Module

      24 Inputs, 8 Outputs, J1939 Input/Output, Hourglass Expansion Module. The GS Global Resources’ XIO2 Hourglass I/O expansion module is a printed circuit board CAN-bus I/O module for applications that require multiple analog and digital inputs, as well as digital outputs. The module is designed to be a node on a CAN-bus, operating at 250 kbps […]

    • GSGR XIO3 Sealed Module

      10 Inputs, 6 Outputs, I-O Expansion or Control Module, Sealed. The GS Global Resources XIO3 is a controller board which can be used as a cost-effective expansion board for an existing control system using J1939 CAN Network. The XIO3 can also be utilized as a stand-alone controller for a specific application allowing for a solution […]

    • IQAN-MC41 Module

      Best for Smaller Applications, 18 Inputs, 8 Outputs, Task-Oriented Control Implementing Single Features For Mobile Hydraulic Systems and Vehicles. The IQAN-MC4x is a family of master controllers.  This is a high-performance master controller for cost-efficient task oriented control, the 3 available sizes may be used in different ways. MC41 for cost-efficient task oriented control MC42 […]

    • IQAN-MC42 Module

      For Mid-Size Applications, 18 Inputs, 16, Outputs, Task-Oriented Control, Implementing Single Features for Mobile Hydraulic Systems, and Vehicles. This is a high-performance master controller for cost-efficient task oriented control, the 3 available sizes may be used in different ways. MC41 for cost-efficient task oriented control MC42 mid-size applications and I/O distribution MC43 large space-saving centralized control The IQAN-MC42 controller […]

    • IQAN-MC43 Module

       For Larger Applications, 18 Inputs, 50 Outputs, Total Vehicle Control (All Hydraulic Functions). High-Performance Master Controller for Cost-Efficient Task Oriented Control. The IQAN-MC4x is a family of master controllers. The three sizes may be used in different ways. MC41 for cost-efficient task oriented control MC42 mid-size applications and I/O distribution MC43 large space-saving centralized control […]

    • IQAN-XC21 Module

      Stackable, Flexible Expansion I/O Module. The IQAN-XC21 is an IQANdesign platform stackable, flexible expansion B32module in the IQAN product group. This unit is a small dimension I/O module to be used as an expansion unit in an IQAN system. It is also useful as an interface with the IQAN-LC6-X05 joystick to provide CAN capability. The […]

    • IQAN-XA2 Module

      8 (20) Inputs, 12 Outputs IQAN design Expansion Module. The IQAN-XA2 is an IQAN design Platform expansion module that is designed for high-performance PWM valve drive control, weather resistance, and safety. All IQAN expansion modules communicate with a master over a CAN-bus, using the IQAN CAN Protocol (ICP). The IQAN-XA2 has increased flexibility that allows […]

    • CM0711 Module

      Semi-Custom Controller Module (master unit), CAN, Powertrain Control (power shift transmissions), Implementing Single Features On A Vehicle (like auxiliary hydraulics control), 7 Inputs, 11 Outputs. The CM0711 controller module (Electronic Control Systems) is a rugged controller that can be used alone or with other controllers in a system. The CM0711 is programmed in C by […]

    • CM2115 Module

      Semi-Custom Controller Module (master unit), Software C and SDK, 1xCAN (J1939), Master Controller with 21 Inputs, 15 Outputs. The CM2115  is a rugged unit that is perfect when used alone or with other controllers in a system. The CM2115 is programmed with C by customers to meet their needs. It communicates using the J1939 protocol […]

    • CM3626 Module

      Semi-Custom Controller Module (master unit), I/O Controller, Program C, 2xCAN (J1939), 36 Inputs, 26 Outputs. The CM3626 is a general purpose input/output controller that can be used to monitor system sensors and drive system loads. It can be used in any systems where hydraulic control, lighting control, or general electrical control is required. The CM3626 […]

    • IQAN-XC22/23 Module

      Small Dimension I/O Module Designed for Outdoor Use on Mobile Machinery. The IQAN-XC22 and IQAN-XC23 are IQANdesign platform expansion modules in the IQAN system, designed for outdoor use on mobile machinery.  This type of unit is a small dimension I/O module to be used as an expansion unit in an IQAN control system. All IQAN […]

    • IQAN-XC10 Module

      30 Inputs, 20 Outputs, IQANdesign Input Output Module. The IQAN-XC10 is an IQANdesign Platform expansion module that is designed to get a high digital I/O count in one module. All IQAN expansion modules communicate with a master over CAN-bus, using the IQAN CAN Protocol (ICP). The IQAN-XC10 is a compatible variant of the VMM3120 and is […]

    • IQAN-XS2 Module

      8 (20) Inputs, 12 Outputs, IQANdesign Expansion I/O Module. The IQAN-XS2 is an IQANdesign Platform expansion module designed for high digital I/O count, weather resistance, and safety. The IQAN expansion modules communication with a master over CAN-bus, using the IQAN CAN Protocol (ICP). The IQAN-XS2 has a large number of inputs and outputs that allow […]

    • VMM0604 Module

      Stand-alone Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 6 Inputs, 4 Outputs. The VMM0604 is a rugged CAN controller unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM0604 communicates using the J1939 protocol […]

    • VMM1210 Module

      Stand-alone Controller CAN/J1939 Multiplexing Module, High-Power Outputs, 12 Inputs, 10 Outputs. The VMM1210 module is a controller that can be used alone or with other VMM modules in a control system. The VMM1210 module communicates using the J1939 protocol over a CAN- bus connection. The controller’s inputs measure analog, digital and frequency signals and outputs suited […]

    • VMM1615 Module

      Stand-alone Controller CAN/J1939 Multiplexing Module, Rugged, High-Power For Heavy Loads, Outputs, 16 Inputs, 15 Outputs. The VMM1615 module is a controller that can be used alone or with other VMM modules in a control system. The VMM1615 module communicates using the J1939 protocol over a CAN- bus connection. The VMM1615 is a rugged CAN controller […]

    • VMM2404 Module

      Multiplexing Module Controller, SAE J1455/EP455, Enhanced Diagnostics, Windows-Based Ladder Logic Programming, 24 Inputs, 4 Outputs. The VMM2404 is a rugged unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM2404 communicates using the J1939 protocol over a CAN-bus connection. The VMM2404 inputs […]

    • VMM3120 Module

      Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 31 Inputs, 20 Outputs. The VMM3120 Multiplexing Module is a software-programmable, multiplexing, input/output controller that monitors dedicated and general-purpose inputs, and controls solid-state switch outputs. Built to meet stringent SAE J1455 environmental standards, the system […]

    • J1939 Powercell Module

      Intelligent Wiring The J1939 powercell gives you a modular and flexible power distribution unit. It uses solid-state mosfets on each output for rugged and durable control. You can connect any J1939 input device to the powercell to control the outputs. These include switch panels, touch screens and other J1939 enabled controllers.

    • mVEC Module

      CAN Network Oversight for High Power Circuits in Vehicle Power Distribution. The Multiplexed Vehicle Electrical Center (mVEC) offers economical CAN Network oversight for high power circuits in vehicle power distribution. Rated at 200 amps, the mVEC can be configured to provide various OEM circuit protection and switching functions, using industry standard fuses, relays, and breakers, […]

    • mRFRM Module

      32 outputs, 14 relays, 28 Fuses, High Power, Rugged, and Flexible with J1939 CAN Configuration & Monitoring. The Multiplexed Rearfed Fuse and Relay (mRFRM) module communicates with other devices on the vehicle’s CAN bus using the SAE J1939 protocol and can be part of a multiplexing system that eliminates the need for individual connections between switches […]

    • RFRM Series 15400 Rear-fed Fuse & Relay Module

      Transportation Products – Custom Solutions for Power Distribution Modules (PDM).         Based on the industry standard 2.8mm (mini) footprint, the RFRM can accept plug-in fuses, relays, circuit breakers, resistors and diodes to meet numerous power management requirements. The RFRM is available with multiple internal bussing options, accommodating various OEM wiring requirements. Efficient […]