SRH520CN Series
Contactless, Hall-Effect, Rotary Sensor, CAN-bus Output, Measurement Range 360°
TheSRH520CN is a contactless, rotary sensor much like the SRH501/2P model, but with additional integrated electronics to provide a CAN-bus interface according to ISO/DIS 11898.
Model SRH520CN is designed to meet the harsh operating requirements in heavy-duty, industrial position-sensing applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks, marine equipment and power generating plants.
- Contactless – Hall-effect technology
- J1939 or CANopen output
- Measurement range 360°
- 14-bit resolution (0.022°/LSB)
- CW or ACW output
- Rugged housing design, in marine-grade aluminum
- Superior shaft strength
- Shaft sealing to IP69K; connector sealing to IP67
- M12 5-pin connector for easy installation
- World-leading availability
This contactless rotary sensor has shaft side protection to IP69K, with minimum IP67 protection at the rear when the mating connector is attached and fully engaged. The SRH520CN incorporates a 14-bit, non-contact, Hall effect sensor with microprocessor control – offering 0.022° resolution.
-
Specifications
- - collapse all
Mechanical
Range 360º - Housing Material Cast aluminum shafted with lever arm Marine grade aluminum Height 70mm 38mm to flange mounting face Width 87.5mm diameter - Mounting 3 Holes 6.5mm diameter bolt circle 76.0mm Through hole .65mm dia Weight <51g - Electrical
Input 9 to 30Vdc (unregulated) and 5 ±0.5Vdc (regulated) A2: 13.5 to 30Vdc (unregulated) Output CAN SAE J1939 or CAN-Open 2.0B SRH520CN/J=J1939 / SRH520CN/C=CAN-Open 2.0B Over-Voltage √ Up to 40 (-40 to +60°C) Reserve-Voltage √ - Output Short-Circuit Protected √ Output to supply in 5V regulated mode only Connections M12 5 pin - Resolution .022º /LSB - Environmental
Operating Temperature Range 40°C to +85°C (9-27Volt supply) - 40°C to +80°C (30 V supply) derate upper temperature limit by 1.7°C for every 1V increase above 27Volts Storage Temperature Range 55°C to +125°C - Protection Class IP68 - IP69K for shaft seal side and rear cap seal IP67 with connector and cable assy attached Vibration BS EN 60068-2-64:1995 Sec 8.4 (31.4gn rms) 20 to 2000Hz Random - Shock 3m drop onto concrete and 2500g - EMC Immunity Level BS EN 61000-4-3:1999, to 100V/m 80MHz to1GHz and 1.4GHz to 2.7GHz (2004/108/EC) Salt Spray BS EN 60068-2-52: 1996 Test Kb Severity 2 (48Hrs) Humidity BS En 60068-2-30: 2005 Severity db (55°C, 93%RH) Options
J1939 option is factory set, with the following parameters: Direction, Baud Rate, Node ID, Frame rate selected by order code. See brochure CAN-open option is partiall customer configurable, See brochure Features & Benefits
Features Benefits Contactless - Hall effect technology Long life and impervious to dither vibration Integrated CAN interface Avoids cost intensive separte I/O modules J1939 or CAN-open output - CAN 2.0B Maximum baud rate of 1Mbit/sec 14 bit resolution (0.022°/LSB) Maximum sensitivity in all applications Rugges housing in marine grade aluminium Suitable for extreme environments Superior shaft strength with duplex bearings Optimum performance under vibration and shock Shaft sealing to IP68 & IP69K; connector sealing ti IP67 Operation in hostile environments including pressure washing M12 connector for easy installation Industry standard connectivity Rapid despatch of any option Eliminate customer inventory Markets
Construction - Agriculture - Military - Applications
Designed to meet harsh operating requirements in heavy-duty industrial position sensing applications - Utility Vehicles - Steelworks - Marine Equipment - Power Generating Plants - -
Market Applications
Agricultural Machinery | Vehicle Cab Designs using Human-Machine Interfaces (HMI)
GS Global Resources is highly experienced in working with agricultural machinery designers to provide safety-critical components and sub-systems that not only […] Read More
Off-Road Forklift
This off-road forklift is used to support large building construction projects. The forks can be loaded with up to 11,000 […] Read More
Twin Row Merger
The Twin Row Merger is used to collect three rows of crop into a single row for efficient harvesting. The […] Read More
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
