Stand-alone Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 6 Inputs, 4 Outputs.
Parker’s VMM0604 is a rugged CAN controller unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM0604 communicates using the J1939 protocol over a CAN- bus connection.
Parker’s VMM0604 is a rugged CAN controller its inputs can measure analog, digital and frequency signals, while the PWM (pulse width modulated) capable outputs are ideally suited for hydraulic valve control.
The VMM0604 is able to be the main controller in a small system or may be combined with other modules in a larger system for vehicle markets including agriculture, on-highway trucks and buses, and off-road construction equipment. Equipped with an aluminum housing and environmentally sealed, 35-pin connector, this controller is designed for the outdoor environment.
The VMM0604 is programmed using VMMS, a ladder logic programming tool that allows customers to develop their own software, making the VMM0604 perfect for any application.
Parkers multiplexing systems are designed to simplify and reduce electrical system troubleshooting, maintenance, and file management time. The modules have status LEDs that indicate the condition of inputs, outputs, power, and network activity.
- + expand all
- - collapse all
Controller Type Master Controller - Dimensions, Overall L 7.8" x W 5.7" x D 1.85" − Connection 35-pin Ampseal connector Used to interface with the inputs, outputs, and CAN Weight 895 (g) -
Supply Voltage 7-32 (Vdc) − - - Inputs 6 - Voltage inputs Up to 6 -Signal range 0-32Vdc -Resolution @ 5Vdc 5 mV Frequency inputs Up to 6 -Signal range 0 - 10000 Hz Digital inputs Up to 6 -Signal-high 3.4Vdc - VBAT -Signal-low 0-1.3Vdc - - Outputs 4 - Digital out high 4 -Type High-side switch -Max. load 3.0 A -Max PWM frequency 500 Hz Digital out low 4 -Type Low-side switch -Max. load 3.0 A - - Electrical Connection Amp Super Seal - Output Current Rating (A) 2.5 -
Operating Temperature −40°C to +85°C − Storage Temperature −55°C to +125°C − Environmental Protection IP66 Built to meet stringent SAE J1455/EP455
Diagnostic/LEDS/Display 12 red diagnostic LEDS Default fault codes includes short to ground or power , over current, and and open loads. Software VMMS Ladder Logic Can be used alone or with other multiplexing modules
Features & Benefits
Monitors up to 6 inpts Analog, digital or frequency 4 high-side 2.5 A outputs - 4 low-side 2.5 A outputs - Pulse Width Modulation for proportional valve control - Multiplexing module is self-programming when replaced in multiple module systems -
Model, Part Number(s) Model Number: VMM0604 Part Number: 0836001ECD
SAE J1939 1 -
Construction Equipment - Transportation - Agriculture Machinery - Material Handling Equipment - Forestry - Specialty - Transportation -
Bus Kneel and Door Open Control - Fan Drive Controller - Truck Mounted Crane Control -
The forwarder and loader transports the timber across rough forest terrain to the processing site near the forest road. Efficient […] Read More
This mobile straddle crane handles multi-million dollar yachts, barges, and large ocean-going vessels which requires precise and carefully coordinated movements. […] Read More
This off-road fork lift is used to support large building construction projects. The forks can be loaded with up to […] Read More
Can't find what you are looking for or need more information? Contact us
- Brochure (PDF)
- Installation Guide (PDF)
- User Manual (PDF)
- 2D Drawing (DWG)
- 3D Drawing (ZIP)
- Software Download
- Parker Vansco Controller I/O Board User Manual - HY-33-5009-IB/US (PDF)
- Parker Vansco Electronic Control Systems - Controllers NA Offering - HY33-5000-US (PDF)
- Parker Electronic Solutions - Bulletin HY33-5050/US (PDF)
- Parker Acquires Vansco Electronics (News)
- Parker IQANdesign 5 Demonstration (VID)
- Parker (Website)