VMM1210 Module
Stand-alone Controller CAN/J1939 Multiplexing Module, High-Power Outputs, 12 Inputs, 10 Outputs.
The VMM1210 module is a controller that can be used alone or with other VMM modules in a control system. The VMM1210 module communicates using the J1939 protocol over a CAN- bus connection. The controller’s inputs measure analog, digital and frequency signals and outputs suited for hydraulic control, lighting control, or general electrical control.
Equipped with a high impact plastic housing and environmentally sealed connectors, this controller is designed for the outdoor environment.
The VMM1210 is a rugged CAN controller with a focus on high power outputs. The high power outputs allow the VMM1210 to control heavy loads, like lights and electric actuators in addition to hydraulic valves. It is able to be the main controller in a range of vehicle markets including agriculture, on-highway trucks and buses, and off-road construction equipment or may be combined with other modules in a large system.
-
Specifications
- - collapse all
Mechanical
Controller Type Master Controller - Dimensions, Overall L 5.04" x W 9.72" x D 1.73" − Connection (2) Delphi Metri-pack series 18-pin connectors Used to interface with the inputs, outputs, and CAN Weight .64 (kg) - Electrical
Supply Voltage (Vdc) 7-32Vdc − Electrical Connection Delphi Metripack - - - Inputs 12 - Voltage inputs min/max Up to 4 -Signal range 0-32Vdc -Resolution 5 mV Frequency inputs min/max Up to 4 -Signal range 0-10000 Hz Digital inputs min/max Up to 12 -Signal high 2.25Vdc - VBAT -Signal low 0-2Vdc - - Outputs 10 Total - Digital out high min/max Up to 10 -Type High-side switch -Max. load 10 A Digital out low min/max Up to 2 -Type Low-side switch -Max. load 10 A Digital out low min/max Up to 2 -Type Low-side switch -Max. load 3 A -Max. PWM frequency 1000 Hz (for both high-side and low-side drivers) - - CAN Communication SAE J1939 1 Environmental
Operating Temperature −40°C to +85°C − Storage Temperature −55°C to +125°C − Environmental Protection IP66 Built to meet stringent SAE J1455/EP455 System
Diagnostic/LEDS/Display 24 red diagnostic LEDS Default fault codes includes short to ground or power , over current, and and open loads Software VMMS Ladder Logis Can be used alone or with other multiplexing modules Features & Benefits
Monitors up to 12 inputs Analog, digital or frequency 8 high-side 10 A outputs - 2 high-side 3 A outputs - 2 low-side 3 A outputs - PWM (pulse width modulation) for proportional valve control - General
Model, Part Number(s) Model Number: VMM1210 Part number: 0736007ECD Communication
SAE J1939 1 - Markets
Construction Equipment - Transportation - Agriculture Machinery - Material Handling Equipment - Forestry - Material Handling - Specialty - Applications
Bus Kneel and Door Open Control - Fan Drive Controller - Truck Mounted Crane Control - -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information