Ferrous Proximity, Normally Open.
The Parker FP2000 is a ferrous proximity sensor for mobile hydraulic applications and will sense ferrous objects. The sensor is available with the sense zone on the side (site A) or on the top (site B) of the case. The ‘site A’ version has twelve inch leads with an attached Deutsch DTM connector. The ‘site B’ version has 10.5 inch leads with an attached Deutsch DT connector. The FP2000 has a glass-filled nylon plastic construction for strength and corrosion resistance. The sensor uses non-contact technology, through the use of an internal reed switch, for trouble free operation. The sensor is very robust and able to withstand rugged applications.
Related Products: Parker FP4000 is a high powered version with an internal relay.
- + expand all
- - collapse all
|Range||Air gap "make" (signal high) 5.1mm||Air gap "break" (signal low) 11.4mm|
|Housing Material||Glass-filled nylon plastic||Corrosion resistance|
|Width||26.9mm||Insert style dependent|
|Mounting||Vertical (bump, drop) Horizontal (bump, tilt)||Large mounting holes|
|Input||System voltage||100Vdc maximum|
|Output||Normally open switch||300mA max current|
|Output Short-Circuit Protected||-||-|
|Connections||2 pin; sealed Deutsch DTM04-2P on 300mm lead wire||DT04-4P option|
|Resolution||Controller dependent||Bounce time 0.4 msec|
|Operating Temperature Range||−40°C to +105°C||-|
|Storage Temperature Range||−40°C to +105°C||-|
This fire truck includes a 105′ extension boom and ladder that rotates at the base. Outriggers are deployed to stabilize […] Read More
Performing maintenance for some of the world’s largest mining machines can be a daunting task since the machines can weigh […] Read More
This off-road fork lift is used to support large building construction projects. The forks can be loaded with up to […] Read More
This power scaffold is used in large building construction projects. The scaffold can be loaded with up to 20,000 pounds […] Read More