CM3626 Module
Semi-Custom Controller Module (master unit), I/O Controller, Program C, 2xCAN (J1939), 36 Inputs, 26 Outputs.
The CM3626 is a general purpose input/output controller that can be used to monitor system sensors and drive system loads. It can be used in any systems where hydraulic control, lighting control, or general electrical control is required.
The CM3626 has two CAN ports for communication through a J1939 protocol Controller Area Network (CAN). By creating custom CAN messaging in software the CM3626 can be used in any CAN 2.0B application.
The CM3626 is programmed using C and a provided SDK.
-
Specifications
- - collapse all
Mechanical
Controller Type Master Controller - Dimensions, Overall L. 317.2 x W. 202.7" (mm) - Enclosure Material Aluminum and Steel - Weight 2.4 (kg) - Connection Type 5 x 18 pins, 90 pins total Deutsch DT16 Mounting Method Four (4) 1/4" or 6mm bolts - Electrical
System Voltage 12V and 24V - Operating Voltage 9V to 32V - - - Micro Core Capabilities - - Micro Type Dual Freescale MPC5534 @ 80 MHz RAM Size¹ 64 Kbyte internal, optional 512 Kbyte externa FRAM Size 128 Kbit - - Communication Channels - - CAN Channels (J1939 compliant) 2 (1 with "Wake on CAN" functionality) CAN channels (programming Micro2) 1 - - Inputs - - Analog Inputs - - Type 1 - 8 programmable pull-up/down including 2 wake-up inputs - Type 2 - 4 programmable pull-up/down and attenuation - Type 3 - 20 programmable pull-down - - Frequency Inputs 4 programmable pullup w/programmable cutoff frequency and analog feedback - - Outputs - - High Side Outputs 18 - Maximum continuous load - 2 x 5 A, 16 x 2 A - Current sensing - 8 capable of current sensing - Maximum PWM frequency - 250 Hz - - Low Side Outputs 8 - Maximum continuous load - 2 x 10 A, 6 x 5 A - Current sensing - Capable of current sensing Reference Voltage (sensor supply) 1 x 5 V/8 V programmable - Maximum Module Current 80 A - Status LEDs 5 - Environmental
Operating Temperature −40°C to +85°C - Storage Temperature −40°C to +85°C - Dust/Water Ingress Protection IP69K and IP66 - System
Software Environment (platform framework) Provides the application developer with the drivers required to access the hardware - Software Development Kit (SDK) Provides the interface between the platform framework and the application software - Application Software Matlab Simulink (can be developed by the OEM or Parker) - General
Ordering Part Number Model Number: CM3626 Part Number: 0991001ECD Communication
Interface 2XCAN (J1939) - Markets
Construction Equipment - Transportation - Agriculture Machinery - Material Handling Equipment - Mobile Vehicle Markets - Forestry - Specialty - Applications
Bus Kneel and Door Open Control - Engine and Transmission Control - Excavator Control - - - It can be used in any systems where hydraulic control, lighting control, or general electrical control is required - -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information