JHS-RC Joystick Control
Single Axis Hall Effect Joystick with Return to Center Feature.
The JHS-RC0001 is a high reliability single axis, spring-return- to-center joystick, resistant to the levels of temperature, shock, vibration and EMI/RFI typically found in off-highway construction environments. The contactless Hall effect sensor eliminates many of the failures associated with traditional joystick technology. The JHS-RC has been tested to four million cycles with no sign of boot wear and no degradation of electrical performance. The electronics are sealed to IP68S. It offers immunity to RFI and EMI per SAE J1113; standard 0.5 to 4.5VDC proportional output. The JHS-RC is recommended for the construction and off-road vehicle market.
Features
- Rugged compact design
- Hall effect contactless sensing
- Tested to 4 million cycles
- Smooth spring return to center
- +/- 25° travel in a rugged housing
- Outstanding EMI/RFI immunity
- Redundant output available
- RoHS compliant
Doesn’t seem like the right fit? Check out the rest of our joystick controls.
-
Specifications
- - collapse all
Mechanical
Life Cycles 4 million cycles All directions; dependent upon configuration Travel Angles 25° typical, 24° min to 26° max - Operating Force 2.5 lbs. typical, 1.5 lbs. min to 3.5 lbs. max - Electrical
ELECTRICAL RATINGS: Rated at 5V @ 20°C Load = 1ma (4.7kΩ) - - Supply Voltage (Vdc) Min: 4.5, Typ: 5, Max: 5.5 - Output Tolerance at Full Travel Direction 1 (+ Travel) [Vdc @5V Vcc] Min: -.25, Max: +.25 - Output Tolerance at Full Travel Direction 2 (- Travel) [Vdc @5V Vcc] Min: -.25, Max: +.25 - Output Tolerance at Center [Vdc @5V Vcc] Min: -.25, Max: +.25 - Supply Current Per Sensor (B = 0, Vcc = 5V, lo = 0) [mA] Max: 10 - Environmental
Operating Temperature Range −40°C to +85°C - Humidity 96% RH, 70°C, 96 hours - Vibration Per MIL-810F min integrity - RFI/EMI Withstand per SAE J1113 - Materials
Housing Thermoplastic - Bellows EPDM, black (typical) - Cable 3/22 AWG (19 strands of 34 AWG TSC) PVC/Polyurethane blend outer jacket - Mounting Hardware: 10-24 x 3/4 carriage bolts, self-locking nuts - Other
Handle Solutions Limited to current design Designed for arm rest & panel mounting Inputs from Handle 3rd proportional rocker option - External Inputs (Other than handle) None - Other USB or Serial available Redundant sensors available -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information