SVR (Sealed Vehicle Rocker)
Above and Below Panel Actuator Style Sealed Vehicle Rockers, Single & Two Pols Switch Circuits, With Two- and Three-Position Momentary And Maintained Circuits.
Sealed Vehicle Rocker Switches (SVR) are designed to meet the severe environmental requirements of the construction and agricultural markets. The switches are sealed at the front and the back of the switch and meets the rigorous sealing requirements of IP68.
The small switch footprint minimizes the space taken on switch panels. The SVR switches are assembled into panels by pressing the switch through the top of the panel and are held in place by retention tabs molded into the body of the switch; mounting hardware or special tools are not necessary.
Offered in single-and two-pole switch circuits, with two-and three-position momentary and maintain circuits available. Switch and illumination circuits are terminated with 0.11 in (2.8 mm) tin-plated copper alloy space terminals. The SVR connector can be loaded with the appropriate terminals and/or wire seals to accomplish sealing at the back-end of the switch.
-
Specifications
- - collapse all
Mechanical
Mechanical Life - - Maintained circuits 250,000 operations minimum Momentary circuits 50,000 operations minimum - - Operating Force 1-3 lbs. (4.4-13.2 Nm) depending on circuit configuration and actuator style - Mounting Hole Standard Panel cutout of 1.45 x 0.83 in (36.8 x 21.1 mm) - Mounting Means Snap-in mounting using four flexible plastic retainers integral with switch frame - Panel Thickness 0.04 to 0.16 in (1.0 to 4.0 mm) Best results obtained between 0.06 and 0.12 in (1.5 and 3.0 mm) Terminal Type Standard 0.11 in (2.8 mm) tin-plated copper alloy spade terminal Mates to AMP Junior Power Timer Terminal (see catalog) Electrical
Electrical Life - - Standard plating 50,000 operations at 12A at either 12 or 24Vdc. Life cycle testing conducted using both inductive and resistive loads Gold plating 250,000 (maintained circuits) / 50,000 (momentary circuits) operations at 10 mA at either 12 or 24Vdc - - Dielectric Strength 1500 volts rms minimum - Ratings 12A at either 12 or 24 Vdc Can be approved under stringent UL and CSA standards Circuits Single-or-two-pole, two-or three-position, with momentary and maintained capabilities - - - Certifications - Base material UL 94 V-O Frame material UL 94 H-B - - Contact Material - - Movable Cooper alloy with silver alloy contact surface Stationary Silver-plated copper alloy with silver alloy contact surface Gold -plated Contacts are available for low level electrical loads - - Illumination - - Long life LEDs provide backlighting illumination for the SVR switch - Backlighting can be either independent of or dependent on the switch circuits Or a combination of both Standard LED color: Amber Red, green and blue available LED protection circuitry is available to protect the LED from overvoltage and reverse voltage conditions - Contact GS Global Resources for more specific information about standard and custom circuit options - Environmental
Operating Temperature -40° to +185° F –40°C to +85°C Storage Temperature -40° to +185° F –40°C to +85°C Environmental Protection IP68 Sealed at the front and back to meet the rigorous sealing requirements Options
Colored actuators, mounting bezels, and lenses - Custom back-lit icons - Gang-mount system - Indicators with insertable lenses - Low current capabilities - Non-illuminated below panel paddle actuator - Palm Guard - Panel plug with connector retention feature - Polarized lock-on connector - Special circuits - Special ratings - Features & Benefits
Connector can be loaded with appropriate terminals and/or wire seals to accomplish sealing at the back end of the switch. Design includes a sealed contact chamber provides dust and water resistance to IP68 - The small switch footprint minimizes the space taken on switch panels - Switch is pressed through the top of the panel and held in place by retention tabs molded into the body of the switch eliminating the need for mounting hardware or special tools - LED protection circuitry protects the LED from over-voltage and reverse voltage conditions - Above panel rocker button offers new styling and a larger surface area - Communication
Communication SAE CAN J1939 2.0B - Markets
Mobile - Construction - Agriculture - Applications
Specialty Vehicle Applications Row Sprayer - Mobile Crane - -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information