Controls

Hydraulics

Eaton E32 eSM (Electronic Switch Module) Multiplexed Rocker Switch

Above-Panel Multiplexed Master Module, LIN Sub-Bus, Communicates With Up To Seven Expansion Modules and Top, Center, and Bottom LED Lighting.

The Easton E32 eSM offers a high level of flexibility, the above-panel electronic multiplex switch module covers your wide range of switch and indicator applications using standard or custom graphics, as well as a full range of circuits and illumination options. The above-panel eSM E32 has top, center and bottom LED lighting with software that offers advanced circuit and lighting flexibility, including dimming and flashing options via J1939 CAN-bus communication.

The indicator bar can be lighted with up to four separate colors to indicate operational status, vehicle mode, and faults. All standard combinations of
maintained and momentary switch actions, matching indicator caps and dummy plugs, along with the complementary styled SVR electromechanical rocker switch are available to complete the offering.

Electronic Switch Modules and Vehicle Displays

Electronic Switch Modules (eSM) and the Electronic Vehicle Display (eVU) are custom ordered, application specific electronic communications products from Eaton’s vehicle and commercial controls catalog.

For additional product flexibility and differentiated operator control, the E31 Keypad eSM is designed to communicate with Eaton’s E32 and E33 sealed rocker.

  • Specifications
    • + expand all
    • - collapse all

    Mechanical

    Mounting Modules easily mounted with plastic retention clips Modules are mounted in a single, space-saving cutout, reducing assembly time and accommodating up to three switches in a compact design
    Panel Thickness Will accommodate 1.5 to 3mm -
    Life Cycle Increase in switch life-cycle over traditional electromechanical switches (500k cycles) -

    Electrical

    Operating Voltage 9-16 Vdc 16-32 Vdc
    CAN Controlled Digital Logic Output 500 mA -
    Immune to SAE J1455 and J1113 Power Disturbances -
    - -
    Wiring Master Module Wire Harness The interconnection between master module and controller uses a simple four-wire harness with addressing specified by jumping between pins 6 to 9. An additional pin-out is provided for a 500 mA output if required
    Mating Connection Information | Housing -
    - ETN 28-6982
    - Amp/Tyco #1394048-1
    - ETN 49-7867
    - Amp/Tyco #2-1355524-3
    - -
    Expansion Module Wire Harness The interconnection between modules uses a cost-effective three-wire harness. This simplified wire harness reduces cost, weight, and assembly labor for the end-user
    - -
    Mating Connection Information | Terminal -
    - ETN 28-6983
    - Amp/Tyco #1-1718346-1 Coding A
    - ETN 80-20608
    - Amp/Tyco #963715-1

    Environmental

    Environmental Protection IP53 From the front

    Options

    Colored rocker options -
    Decorative-style rocker with matching indicator option available -
    Sleep mode available to reduce current draw on the battery -

    Features & Benefits

    Fully compliant with J1939 CAN 2.0b messaging -
    LED lighting in top, center and bottom positions -
    Late point definition of circuit and rockers to reduce inventory and accommodate multiple application requirements -
    Easy address assignment -
    Front panel removable for ease of maintenance -
    Sleep mode available to reduce current draw on the battery -
    Wake on switch change configurable -
    -
    Manufacturing Flexibility - -
    E32 eSM offers a tremendous amount of flexibility including options for complete assemblies to be provided as well as late-point definable rocker and circuit. Individual components can be purchased independently and assembled to create any combination of circuits and icons which is especially suited for low volume/high mix applications minimizing inventory requirements -
    Rockers and indicators can also be laser-etched with custom icons by Eaton or other to accommodate application specific requirements Contact GS Global Resources to discuss this Eaton solution further

    Communication

    Fully Compliant with J1939 CAN 2.0b Messaging -

    Markets

    On-Road Specialty Vehicle -
    EMS Vehicles -
    Street Sweepers -
    Recreational Vehicles -
    Motor Coach/Bus -
    Refuse Vehicles -

    Applications

    Especially suited for applications that require both high current independently wired switches using Eaton NGR switches as well as those applications realizing the benefits of multiplexing -
    The E30 eSM also has the capability of having a separate input for key switch and dimmer control functions to increase the flexibility of the product to interface seamlessly to your vehicle -
    - -
    Motor Couch/Bus -
    Specialty Vehicle -
    Truck -
  • Market Applications

    Mobile Crane

    This mobile crane has been modified for railroad track maintenance. The crane is positioned over the tracks, then guide wheels […] Read More

    Rubber Tire Tree Harvesting Machine

    This rubber tire tree harvesting machine is used in some of the worst climates and harshest conditions to quickly and […] Read More

    Water Sprayer

    In many remote work sites, water is a rare and expensive resource that must be conserved. Maintaining precise control over […] Read More

    Eaton NGR | Custom Switches (Eaton)

    GSGR offers a wide variety of product solutions from well-known brands all with unique performance characteristics which are designed for […] Read More

    Switch and Indicator Applications | Total Flexible Solution | Multiplexed Master Module (Eaton)

    Multiplexed Master Module utilizing a LIN sub-bus to communicate with up to seven expansion modules Offering a high level of […] Read More

  • Resources
  • Request Information

    Let us know how we can help. All fields are required.



Design - Build - Apply

Integrated Engineered Solutions by GS Global Resources

Browse Solutions