IZ Series – Plastic Latching
Rear Mounted Sealed Pushbutton Switches, Bushing ø 16 mm.
The IZ Plastic Latching Series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier. The IZ Series main features include rear mounting for easier installation, sealed to IP67, and a flat actuator for optional marking.
-
Specifications
- - collapse all
Mechanical
Panel Thickness 3 mm (.118) max. - Total Travel 1.8 mm (.070) ± 0.3 mm - Typical Operating Force 5 N ± 2 N - Low Level / Mechanical Life 200,000 cycles - Torque 0.7 Nm max. applied to nut - Soldering 320 ºC max. for 3 sec. - Electrical
Max. Current/Voltage Rating with Resistive Load 100 mA 24 Vdc - 200,000 cycles - Initial Contact Resistance 100 mΩ max. - Insulation Resistance 1 GΩ min. at 500 Vdc - Dielectric Strength 1,500 Vrms between terminals - Environmental
Front Panel Sealing IP67 according to IEC 60529 - Shock Resistance 100 g according to IEC 512-4, test 6d - Vibration Resistance 10-500 Hz-10 g according to IEC 512-4, test 6d - Salt Spray IEC 512-6, test 11f - Operating Temperature -40 °C to +85 °C (-40 °F to 185 °F) - Materials
Case Thermoplastic UL94-V0 - Plunger Polyamide - Bushing/Bezel Brass, nickel plated - Contacts silver, gold plated - Multi-wire lead AWG20, section 0.6 mm² - LED wire AWG26, section 0.12 mm² - Lens Polycarbonate - Terminal Seal Epoxy (except screw terminals) - Options
Illuminated and non-illuminated - Features & Benefits
Rear mounting for easier installation - Latching - Sealed to IP67 - Illuminated or non-illuminated - Flat actuator for optional marking - -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information