Controls

Hydraulics

GSGR GS15031-101 AL10

Air Cooled (air-to-oil), Nominal Heat Rejection: 6 HP.

The GS Global Resources GS15031-101 AL10 Offline Cooling System allows for cooling of gearboxes and reservoir solutions without impacting existing plumbing of the system.

  • Cooler is a compact system for removing approximately 6 HP of heat continuously from hydraulic or lubrication system
  • Small compact size cooling solution allows for installation in tight areas and is ready to install
  • Compact solution utilizes proven air cooler cores allowing for cooling of thick lube oils
  • System comes with thermal bypass valve and is protected from overpressure
  • Three-phase multi voltage premium efficient dual shafted motor is rated for outdoor use which allows the cooling system to be installed in most applications
  • Double shafted motor solution with gear pump allows for pumping of fluids from ISO150 to ISO320
  • Gear pump has double shaft seal for pumping of very thick fluid
  • Pump is designed for high vacuum inlet condition
  • All cooler systems can be customized to your particular needs including additional filtration and monitoring

 

  • + expand all
  • - collapse all

Specifications

Mechanical

Electric Motor Information - -
2.0 HP at 60 Hz (208, 230, and 460V 3-phase) 1170 RPM Amps (8.0, 7.2, and 3.6)
1.5 HP at 50 Hz (190-200/380-400V 3-phase) 960 RPM Amps (13.0, 12.0, 6.5, and 6.0)
- -
Envelope Dimension L. 32.0 X W. 18.0 X H. 24.3 inches -
- -
Porting - -
Inlet - #20 JIC male 37° -
Outlet - #16 JIC male 37° -
- -
Gear Pump - -
Flow @ 60 Hz - 7.6 GPM -
Flow @ 50 Hz - 6.2 GPM -
- -
Notes: Double shaft seal for high viscosity oils is critical in ensuring proper performance. Larger suction port allows for very high viscosity pumping when oil is cold and high viscosity -

Heat Rejection

(HP)/BTU/Hour @ 50°F Delta Temp - -
(6.14 HP) 15,620 BTU/Hr. @ 60 Hz -
(6.00 HP) 15,320 BTU/Hr. @ 50 Hz -

Temperature

Control and Bypass Temp control - full bypass below 140°F, transition from 140°F to 165°F, no bypass after 165°F -
Relief Pressure 65 PSID relief for cooler safety -

General

Filtration No additional filtration on this version -
Notes Electric motors are totally enclosed non-ventilated (TENV) double shafted units. The motors are premium efficient with multiple voltage ratings All motors are three-phase

Other

Applications: - -
Industrial -

Resources

Can't find what you are looking for or need more information? Contact us