Controls

Hydraulics

GSGR GS15031-501 AL55

Air Cooled (air-to-oil), Nominal Heat Rejection: 32 HP.

The GS Global Resources GS15031-501 AL55 Offline Cooling System allows for cooling of gearboxes and reservoir solutions without impacting existing plumbing of the system.

  • Cooler is a compact system for removing approximately 32 HP of heat continuously from hydraulic or lubrication system
  • Efficient package size cooling solution allows for installation in tight areas and is ready to install
  • Compact solution utilizes proven air cooler cores allowing for cooling of thick lube oils
  • The system comes with thermal bypass valve and is protected from over pressure
  • Three-phase multi voltage premium efficient dual shafted motor is rated for outdoor use which allows the cooling system to be installed in most
  • Double shafted motor solution with gear pump allows for pumping of fluids from ISO150 to ISO320
  • Gear pump has double shaft seal pumping of very thick fluid
  • Pump is designed for high vacuum inlet condition
  • All cooler systems can be customized to your needs including additional filtration and monitoring
  • + expand all
  • - collapse all

Specifications

Mechanical

Electric Motor Information - -
5.0 HP at 60 Hz (208, 230, and 460V 3-phase) 1155 RPM Amps (20.0, 18.4, and 9.2)
3.0 HP at 50 Hz (190-200/380-400V 3-phase) 960 RPM Amps (10.0-9.0, 5.0, and 4.5)
- -
Envelope Dimension L. 36.2 X W. 34.2 X H. 36.9 inches -
Porting - -
Inlet #32 JIC male 37° -
Outlet #20 JIC male 37° -
- -
Gear Pump - -
Flow @ 60 Hz. - 29.0 GPM -
Flow @ 50 Hz. - 24.1 GPM -
- -
Notes: Double shaft seal for high viscosity oils is critical in ensuring proper performance. Larger suction port allows for very high viscosity pumping when oil is cold and high viscosity -

Heat Rejection

(HP)/BTU/Hour @50°F Delta Temp - -
(32.80 HP) 83,560 BTU/Hr. @ 60 Hz -
(31.50 HP) 80,217 BTU/Hr. @ 50 Hz -

Temperature

Control and Bypass Temp control - full bypass below 140° F, transition from 140° F to 165° F, no bypass after 165° F -
Relief Pressure 65 PSID relief for cooler safety -

General

Filtration No additional filtration on this version -
Notes Electric motors are totally enclosed non-ventilated (TENV) double shafted units. The motors are premium efficient with multiple voltage ratings All motors are three-phase

Other

Applications: - -
Industrial -

Resources

Can't find what you are looking for or need more information? Contact us