Controls

Hydraulics

Industrial

Efficient Cooling for Industrial Applications.

Overheating your system is an expensive problem. An under-sized cooling capacity produces a “too high-temperature” balance. The consequences are poor lubrication, internal leakage, higher risk of cavitation, damaged components, and more.  All in all, over-heating leads to a significant drop in cost efficiency and environmental consideration and can be expensive in the long run not to mention time-consuming.

Temperature optimisation for cost-efficient operation

Temperature balance in a hydraulic system occurs when the cooler can cool the energy input that the system does not consume – the system’s lost energy: (Ploss = Pcool = Pin – Pused)

Temperature optimisation means that temperature balance occurs at the system’s ideal working temperature – the temperature at which the oil’s viscosity and the air content comply with recommended values.

Benefits of a correct working temperature include:  Extended system service life, extended oil service life, increased system availability- more operating time and fewer shutdowns reduced service and repair costs, and maintained efficiency in continuous operation – system efficiency falls if the ideal working temperature is exceeded.

Our Industrial solutions offer air cooled oil coolers built with or without electric AC motors and water cooled shell & tube coolers designed for multiple fluid types and built from aluminum, copper, and steel for fluid power-related applications.

Markets: Hydraulic Presses, Injection Molding and Extrusion, Hydraulic Power Units, Oil & Gas, Wind Energy, Paper Industry, and more.

    • AO Series

      Air-to-Oil, Industrial, Copper Tube / Aluminum Fin, Low to Medium Flows. The Industrial AO Series Cooler features an AC fan drive and is ideal for medium flow rates and moderate heat removal. This Series is available with an optional pressure internal pressure bypass. Cabinet louvers allow the user to regulate the direction of heated exhaust […]

    • AOC Series

      The Industrial AOC Series Cooler features an AC fan drive and is ideal for low flow applications. This cooler is a cost-effective solution for power unit applications and is available in single or dual fan designs. The dual-rated (50/60 Hz) electric motor allows for application flexibility. Removable air filters prevent air-side core blockage (clogging of […]

    • AOF Series

      Industrial, Air Cooled, Copper Tube, Aluminum Fin, One or Two Pass Option. The Industrial AOF Series Cooler is an AO Series with a removable airside filter. The series features an AC fan drive and is ideal for medium flow rates and moderate heat removal. Cabinet louvers allow the user to regulate the direction of heated […]

    • AOL Series

      Industrial & Mobile Air Cooled, Brazed Aluminum, Hydraulic or Compressor Oil Cooling. The versatile and high performing AOL Series Cooler is applicable to both hydraulic and compressor oil cooling. The design features proven brazed aluminum P-BAR™ plate and bar core technology engineered with an aggressive turbulator that produces ultra-high heat transfer.  Vertical air flow and […]

    • AOVH Series

      Fluid Cooling Industrial, High-Performance, High Flow Rates, One or Two Pass. The industrial AOVH Series Cooler is a high-performance version of the AO Series Cooler that features high flow rates and higher heat rejection in a compact size. The series design includes a double core, high-performance fan and adjustable louvers that allow the user to […]

    • COL Series

      Ideal for Independent Cooling and Filtering of System Oils. The COL Series Cooler is an air-cooled off-line fluid conditioning system utilizing reliable and high performing screw pump technology for independent cooling and filtering of system oils. Choose the standard brazed aluminum P-BAR™ plate and bar core technology or the optional T-BAR™ core for high viscosity […]

    • LAC Series

      Air Oil Coolers with AC Motor for Industrial Use, Maximum Cooling Capacity 300 Kw. The LAC Air Cooler Series is suitable for most industrial applications offering an efficient and robust design available in a range of cooling capacities from 1kW to 300Kw. The LAC air oil cooler is quiet in operation and offers a low-pressure […]

    • LHC Series

      Air Oil Coolers with Hydraulic Motor for Mobile and Industrial Use. The LHC Air Oil Cooler Series with Hydraulic Motor is suitable for mobile and industrial market applications and is available in a range of cooling capacities from 1kW to 300 kW. Please use the sizing software for proper cooler sizing. The LHC air oil […]

    • LOC Series

      Air Oil Cooler with AC Motor & Pump. The LOC Air Oil Cooling System with AC-motor and pump provides cooling up to 45kW. Its robust construction makes it suitable for most applications and environments. Please use the Sizing Software on the Product Support Tab for proper cooler sizing. The LOC cooling system with three-phase AC […]

    • MAC Series

      Air Oil Cooler with AC Motor for Marine Applications. The MAC Air Oil Cooler Series is engineered for Marine nearshore and offshore applications and provides cooling capacity up to 300 kW. Corrosion resistance meets C4-M and C5M-M requirements according to ISO 12944. The MAC air oil cooler has been specially engineered for installation in highly […]

    • OCA Series

      Industrial & Mobile, Fan Cooled, T-Bar Brazed Aluminum Core, Steel Framing. The OCA Series Cooler is available in a wide range of sizes designed for a broad range of both mobile and industrial applications. Its rugged steel construction features the patented T-BAR™ solid extrusion core technology but is more efficient and lighter in weight than competitor […]

    • RM Series

      Mounts Behind Existing TEFC Motor for Compact, Low-Cost Application. The compact Industrial RM Series Cooler is an efficient, low-cost, low-flow design that mounts behind an existing TEFC motor. It provides optimal performance for case drain cooling applications. This compact design includes multiple pass options as standard and an adjustable mounting plate that allows the cooler to […]

    • ULAC Series

      Air Oil Cooler with AC Motor, Size 058G, Three Phase, 575V, 60HZ, No Thermal Switch, No Bypass. The ULAC Series Oil Coolers offer a compact and durable design that will provide efficient performance and long life. They provide up to 400hp of cooling and are suitable for most applications and environments. The ULAC Air Oil […]

    • ULHC Series

      Air Oil Cooler with AC Motor, Air-to-Oil, Industrial & Mobile Application, up to 215HP of Cooling. The ULHC Series Oil Coolers offer a compact and durable design that will provide efficient performance and long life. They provide up to 215hp of cooling and are suitable for most industrial and mobile applications. The ULHC Air Oil […]

    • ULOC Series

      Cooling System, Industrial Use, Cooling Capacity up to 60 HP, Three-Phase AC Motor, 575V, 60Hz, 25.4 GPM, No Bypass. The ULOC Series Oil Coolers offer a compact and durable design that will provide efficient performance and long life. They provide up to 60hp of offline cooling and are suitable for most applications and environments. This […]

    • ULRM Series

      Rear-Mount Oil Cooler, Bar & Plate Construction, Efficient & Durable Design. The ULRM Series Rear-Mount Oil Coolers are designed to fit behind standard TEFC electric motors, covering all standard NEMA frame sizes up to 324T/326U. Rear-Mount Coolers are ideal for applications requiring minimal cooling, such as a case drain line on a Hydraulic Power Unit […]