Controls

Hydraulics

Rotary Sensors

    • Curtiss-Wright’s WM-830

      48.5° Non-Contact, Rotary Position Sensor. The Curtiss-Wright’s  WM-830 is a cost-effective rotary sensor utilizing proven Hall-effect technology to ensure accurate and reliable measurement of angular position. Mechanical engagement with the rotating portion of the sensor is via a slotted cavity, while the electrical output span corresponds to a rotation of 48.5° . Operation is from […]

    • Curtiss-Wright NRH305DR

      No-Contact, Rotary Position Sensor, 5Vdc. The NRH300 product family is a range of no-contact, Rotary Position Sensors that offer the optimal combination of performance, safety, and cost. The Curtiss-Wright (Penny & Giles) NRH305DR utilizes proven Hall effect sensing technology in a low-profile (8mm) housing with a separate magnet for true no-contact sensing. The electrical output […]

    • Curtiss-wright NRH300DP

      No-contact, Rotary Position Sensor, Varying Voltage Range of 9-30v. The Curtiss-Wright (Penny & Giles) NRH300DP utilizes proven Hall effect, sensing technology in a low-profile (8mm) housing with a separate magnet for true no-contact sensing.The electrical output span can be set to correspond to rotations of 20° to 360°, and the positional information is determined by […]

    • Joral HP38

      Hockey Puck, 38mm, OEM Based, Non-Contact Rotary The Joral HP38 is a absolute single-turn, multi-turn, or incremental encoder. OEM based driven solution, with minimum order quantities, with patented true non-contact position sensing;  0.5″ (12mm) gap between sensor and application, 0.10″ (2.5mm) center alignment, 30° planar tilt with LED indicators for power and output feedback. Incremental or […]

    • Joral HP58

      Hockey Puck, 58mm Full Size, Non-Contact Rotary. Joral HP58 absolute single-turn, multi-turn or incremental encoder is a patented true non-contact position sensing 0.5″ (12mm) gap between sensor and application, 0.10″ (2.5mm) center alignment, -30° planar tilt. Totally sealed IP69K (connector depemdent), the HP58 detects rotation through non-ferrous barriers. Special applications include use in explosion proof […]

    • Joral JZ

      Zero Power Position Sensor. NEW!  Joral JZ Absolute Zero Power Position Sensors Zero Power capability permits position sensing while powered down. Contact Us to discuss your application needs. Zero power absolute position sensor • 10 year zero power functionality; external power wireable • Patented true non-contact position sensing • Totally sealed IP69K (connector dependent) • […]

    • Joral PE30

      1.2″ (30.5mm), Non-Contact Rotary ProxEncoder™. The Joral PE30 is a compact IP69K, non-contact rotary encoder that is extremely compact in design and is J1939 capable. Patented true non-contact position sensing; 0.5″ (12mm) gap between sensor and application,0.10″ (2.5mm) center alignment ,30° planar tilt ,LED indicators for power and output feedback with incremental or absolute position. Outputs: Quadrature, Step and Direction, […]

    • Joral TZ

      Through Shaft Absolute Zero Power Position Sensor. The Joral TZ maintains absolute count while totally disconnected from source power. The magnet package can be modified to fit unique installations. The standard installation utilizes 2” inner diameter magnet ring rotating on through shaft. The magnet package can be segmented to fit in hard access installations. Joral […]

    • Parker-Connector Kits – Sensor Connectors

      Parker’s connector kits for standard sensor products contain all of the necessary housing parts, terminals, and seals for each sensor’s mating connector.  Parker’s sensor connector kits are an easy way to get all the parts needed to quickly interface to a sensor’s mating connector. The type of connectors used in the sensor product line are […]

    • Parker RF50

      Sensor Condition Monitoring 0-5v, Ratiometric Output, Non-Contact. The Parker RF50 is a 0-5V, ratiometric output, non-contact rotary control for mobile hydraulic applications. It has an anodized aluminum body and 90-degree working angle.The RF50 has twelve-inch leads and an attached Deutsch connector. The RF50 has anodized aluminum construction for strength and corrosion resistance. The control uses non-contact, Hall effect […]

    • Parker RF55

      Sensor Condition Monitoring 0-5v  Ratiometric Output, Non-Contact & 12v Battery Options. There are 3 versions of the Parker RF55 rotary friction control. Two of the versions are powered by 5Vdc and have 10%-90% ratiometric outputs. Of these, 1 has a 90° working angle, 3 detents and dual outputs, the other has 360° continuous rotation and […]

    • Parker RS52

      Sensor Condition Monitoring 0-5V Output, Non-Contact, 90º Working Range. The Parker RS52 is a 0-5V output, non-contact, rotary sensor suitable for a variety of applications. The RS52 sensor has a working range of 90 degrees. The sensor has twelve inch leads and an attached Deutsch connector.The RS52 has a glass-filled nylon plastic construction for strength and corrosion resistance. The sensor […]

    • Parker RS53

      Sensor Condition Monitoring 0-5V Ratiometric Output, Non-Contact, Full Revolution, Continuous Rotation Working Range. The Parker RS53 is a 0-5V ratiometric output, non-contact, rotary sensor suitable for a variety of applications. The RS53 sensor has a full revolution, continuous rotation working range. The sensor has a short length of wire, terminated with a Deutsch DTM connector. The RS53 has a glass-filled nylon […]

    • Parker RS60

      Sensor Condition Monitoring 0-5V, Dual Output, Non-Contact, Through-Hole Coupling. The Parker RS60 is a 0-5V, dual output, non-contact rotary sensor for mobile hydraulic applications. The sensor has a through-hole coupling and has twelve inch leads with an attached Deutsch connector. The RS60 has a glass-filled nylon plastic construction for sturdiness and corrosion resistance. The mounting holes are reinforced with aluminum inserts […]

    • Parker RS70

      Sensor Condition Monitoring 0-5V, Dual Output, Non-Contact, 170º or 100º Working Angle. The Parker  RS70 is a 0-5V, dual output, non-contact rotary sensor for mobile hydraulic applications. The sensor comes in 2 versions with different working angles. The sensor has twelve inch leads and an attached Deutsch connector .The RS70 has a glass-filled nylon plastic construction for sturdiness and corrosion […]

    • Penny & Giles NRH271 & NRH272

      The NRH271 and NRH272 family of no-contact, Rotary Position Sensors offers the optimal combination of performance, safety and cost. All variants utilize proven Hall-effect sensing technology and are accommodated in low-profile housing with a compact footprint. No-contact, Hall-effect technology Wear free – unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360° 5V or 9-30V […]

    • Penny & Giles NRH275DR

      5Vdc Dual-Redundant Output, Non-Contact, External Position Magnet. The Penny & Giles NRH275DR is a  dual-redundant output, non-contact, rotary position sensor with a slim, low-profile sensor housing with a separate permanent magnet assembly. The NRH275DR operates from a 5Vdc (±0.5) regulated supply to each independent sensor channel, and has two independent outputs, enabling full redundancy from a […]

    • Penny & Giles NRH280DP

      5Vdc or 9-30Vdc, Dual-Redundant, Output, Non-Contact. The Penny & Giles NRH280DP is a  dual output, no-contact rotary position sensor with the slimmest low profile housing, using a factory programmable Hall effect sensor system. Non-Contact with external positions magnet the NRH280DP has a co-moulded fully encapsulated sensor system that can withstand high shock and vibration as well as […]

    • Penny & Giles NRH285DR

      5Vdc, Dual-Redundant Output, Non-Contact, Two Independent Outputs, Full Redundancy. The Penny & Giles NRH285DR is a dual-redundant output, no-contact rotary position sensor with the slimmest low profile housing, using a factory programmable Hall effect sensor system. The NRH285DR non-contact position sensor operates from a 5Vdc (±0.5) regulated supply to each independent sensor channel, and has two independent […]

    • Penny & Giles SRH220DR

      5Vdc or 9-30Vdc, Contactless, Dual-Redundant, Hall Effect. The Penny & Giles SRH220DR is a dual-redundant output, contactless, rotary position sensor with integrated 6-way connectors, using a factory programmable Hall effect sensor system. SRH220DR operates from either 5Vdc regulated or 9-30Vdc unregulated power supply and is available with analog (0.1-4.9, 0.5-4.5 or 0-10Vdc) or digital (PWM) output signals. […]

    • Penny & Giles SRH280DP

      5Vdc or 9-30Vdc, Contactless, Dual Output, Hall Effect, Analog or Digital Output. The Penny & Giles SRH280DP is a contactless rotary position sensor, which uses a factory-programmable, non-contact, Hall effect sensor system. SRH280DP operates from either 5Vdc regulated or 9-30Vdc unregulated power supply and is available with analog (0.5-4.5Vdc) or digital (PWM) output signals. The sensor […]

    • Penny & Giles SRH301 & SRH302

      The Penny & Giles  SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost. The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost. The sensor utilises proven Hall-effect, sensing technology in a low-profile (17.3mm) housing with integral […]

    • Penny & Giles SRH500P

      5Vdc or 9-30Vdc, Contactless, Dual Output, Hall Effect, Analog or Digital Output. The Penny & Giles SRH500P dual-output, contactless, rotary sensor has been specially developed to meet the harsh operating requirements in heavy-duty, industrial position-sensing applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks, marine equipment and […]

    • Penny & Giles SRH520CN

      Contactless,, CAN-bus Output, Hall Effect. Penny & Giles SRH520CN is a contactless, rotary sensor much like the  SRH501/2P model, but  with additional integrated electronics to provide a CAN-bus interface according to ISO/DIS 11898. Model SRH520CN is designed to meet the harsh operating requirements in heavy-duty, industrial position-sensing applications, including construction, agricultural, military and utility vehicles, as well as […]

    • Penny & Giles SRH880P

      5Vdc or 9-30Vdc, Contactless, Submersible, Analog or Digital Output The Penny & Giles  SRH880P is a submersible, contactless rotary sensor has been specially developed to meet the harsh operating requirements in heavy-duty industrial position-sensing applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks and power generating plants. This […]

    • Penny & Giles SRS280

      Sealed, Angles From 10 to 35º,  in 10º Increments. The Penny & Giles SRS280 sealed rotary sensor has been specially developed to meet the harsh operating requirements of today´s automotive and motorsport markets, with a number of innovative design features incorporated to overcome the shortcomings of existing products from other manufacturers. The SRS280 uses the proven […]

    • Penny & Giles SRS880

      10º to 350º in 10º Increments, Submersible Rotary Sensor. The SRS880 submersible rotary sensor has been specially developed to meet the harsh operating requirements of today´s heavy duty industrial position-sensing applications, including construction, agricultural, military and utility vehicles, as well as a variety of uses in steelworks and power generating plants. This model can operate […]

    • Penny & Giles TPS280DP

      5Vdc (and 9-30Vdc), Contactless, Throttle Position, Dual Output. The Penny & Giles TPS280DP is a variant of the popular, contactless rotary position sensor range, which uses a factory programmable non-contact, Hall effect sensor system.Electrically interchangeable with potentiometers the TPS280DP is designed as the modern alternative throttle position sensor (TPS) to rotary potentiometers fitted on high-performance race […]