Controls

Hydraulics

Angle Sensors

GS Global Resources Offers an extensive range of rotary position sensors, non-contact rotary sensors and hall effect rotary sensors which offer angle measurements from 10° to 360°.

We use rotary hall effect sensor, inductive and potentiometric technologies, packaged in compact or rugged housings, with environmental protection to IP68 and IP69K.

Our offering of Analog Tip, Tilt, and Level Sensors gives the OEM a variety of analog switches and sensors to meet their application leveling needs

View our top brands. If you can’t find what you are looking for contact us here, we will be happy to assist you.

    • ACC50 Series

      Sensor Condition Monitoring 0-5Vdc Output Accelerometer, IQAN Compatible, Electronic Control Systems. The ACC50 is a 0-5 Vdc output accelerometer and has a variety of uses for mobile hydraulic applications. The ACC50 can be used to sense vibration, impact, tilt, and motion of the equipment where it is mounted. The measuring range is +/- 1.5 G. The […]

    • ACC100 Series

      A Single-Axis, Dual Output, Non-contacting Tilt Sensor That Can Be Used to Indicate Level Position in Many Mobile Hydraulic Applications, IQAN Compatible. The ACC100 is a 5 Vdc, dual output inclinometer built with accelerometer technology for mobile hydraulic applications. The ACC100 can be used to sense tilt and motion of the equipment where it is […]

    • ACC Series

      Acceleration Sensor, 1.2-3.8 Vdc Output Accelerometer or 2.103-3.132 Vdc Dual Output Accelermoter, Used to Sense Tilt and Motion, IQAN Compatible, Electronic Control Systems. The Accelerometer and Inclinometer Sensors are MEMs devices with an output voltage dependent on the amount of inertial force applied. The accelerometers and inclinometers have an inertial range up to ±1.5G. The […]

    • ADS50 Series

      Analog Lever Distance Sensor, Hall Effect, for Outdoor Applications, IQAN Compatible, Electronic Control. The Analog Lever Distance Sensors  – ADS are Hall effect devices with an output voltage dependent upon the angular position of a lever arm. They utilize non-contacting technology and provide a linear output over one inch (35 degrees) of travel. The ADS […]

    • ATS50 Series

      Sensor Condition Monitoring 0-5Vdc Non-Contact, Hall Effect, Angle Tilt – Single-Axis, IQAN Compatible, Electronic Control Systems. The ATS50 is a non-contact, Hall effect angle/tilt sensor for mobile hydraulic applications. The ATS50 will sense angular movement in one-axis and output a ratiometric 0-5Vdc signal. The measuring range is +/- 10 degrees. The sensor has twelve-inch leads with an […]

    • ATS90 Series

      Sensor Condition Monitoring 0-5Vdc Non-Contact, Hall Effect, Angle/Tilt – Dual-Axis The ATS90 is a non-contact, Hall effect angle/tilt sensor for mobile hydraulic applications. The ATS90 will sense angular movement in two axes and output a ratiometric 0-5Vdc signal for each axis based on position. The sensor has twelve-inch leads and an attached Deutsch connector. Angle/Tilt […]

    • DINC Series

      Two Individual (Dual) 3-Axis Inclinometer with True Angle Change. The 3-Axis inclinometers are rated IP69K and report true angle change relative to set home via J1939 regardless change from installed orientation. The sensor’s solid-state circuit processes raw inclinometer data with 3D vector math in real time to report accurate angle change across all three-axis of […]

    • LS60 Series

      Sensor Condition Monitoring Solid State, Dual Axis, Level, Tilt Sensor, for Mobile Hydraulic Applications, Electronic Control. The LS60 delivers dual-axis level sensing where it is critical to limit the amount of tilt to operate machinery safely. It can be used to supply power to functions that should be used when within normal operating conditions. The […]

    • RM50 Series

      Non-Contact, Tilt Sensing, Single-Axis, IP67 for Outdoor Applications, IQAN Compatible, Complementing Electronic Control Systems. TheRM50 is a rolling magnet tilt switch and will sense angular movement in one axis. The sensor has twelve-inch leads and an attached Deutsch connector. Suitable for mobile equipment, the RM50 has a glass-filled nylon plastic construction for strength and corrosion […]

    • SINC Sensor

      One Individual 3-Axis Incline Sensor with True Angle Change. The 3-Axis inclinometers are rated IP69K and report true angle change relative to set home via J1939 regardless change from installed orientation. The sensor’s solid-state circuit processes raw inclinometer data with 3D vector math in real time to report accurate angle change across all three-axis of […]

    • STT280 Series

      Sealed Tilt Sensor, Choice of Measurement Ranges From ±10°, ±20°, ±30°, and ±60°. The STT280 sealed tilt sensor is designed to provide reliable, fit-and-forget tilt measurement sensing within an extremely compact housing, for the most arduous operating environments. No moving parts High-resolution ±0.07° Absolute measurement Measuring ranges ±10°, ±20°, ±30° and ±60° Less than 6.5mA […]

    • STT500 Series

      Sealed Tilt Sensor, Fit-And-Forget Measurement Ranges From ±10°, ±20°, ±30°, and ±60°. The STT500 sealed tilt sensor is designed to provide reliable, fit-and-forget tilt measurement sensing within an extremely rugged cast aluminum housing, for the most arduous operating environments. No moving parts High-resolution ±0.07° Absolute measurement Measuring ranges ±10°, ±20°, ±30° and ±60° Less than […]

    • UTS Series

      Universal Tilt Sensor For Mobile and Other Applications, CAN-bus SAE J1939 protocol. 2 versions Of The Micro Electro-mechanical Devices Available Calibrated For Tilt Angles of ±10 degrees or ±90 Degrees. The UTS, Universal Tilt Sensor, is a dual-axis, MEMS technology tilt sensor for mobile hydraulic applications. It communicates over a CAN-bus using SAE J1939 protocol. […]