SRH220DR Series
5Vdc or 9-30Vdc, Contactless Rotary Sensor, Dual-Redundant Outputs, Hall Effect Technology, Measurement Range from 0-20° to 0-360° in 1° Increments.
The SRH220DR is a dual-redundant output, contactless, rotary position sensor with integrated 6-way connectors, using a factory programmable Hall effect sensor system. SRH220DR operates from either 5Vdc regulated or 9-30Vdc unregulated power supply and is available with analog (0.1-4.9, 0.5-4.5 or 0-10Vdc) or digital (PWM) output signals.
This sensor is factory programmable, allowing you to specify the output signal type, the measurement range (0-20° to 0-360° in 1° increments) and the output direction (clockwise or anticlockwise).
The SRH220DR provides reliable and accurate rotary position measurement in extreme industrial environments, such as specialist off-highway construction and agricultural vehicles, where shock, vibration, and extreme temperatures can occur.
- Contactless – Hall-effect technology
- Dual-redundant output
- 5Vdc or 9-30Vdc supply (13.5-30Vdc only for 0-10Vdc output version)
- Analog (0.1 – 4.9, 0.5 – 4.5 or 0-10Vdc) or Digital (PWM) outputs
- Measurement range from 0-20° to 0-360° in 1° increments
- 12-bit resolution (0.025%) over the angular range
- Extremely low signal noise level – less than 1mVrms
- Electrically interchangeable with potentiometers
- Operating temperature -40° to +140°C
- Environmental protection to IP68
- Crush-proof mounting flange with steel inserts
- Choice of Deutsch or AMP connector
- Optional lever drive arm is available.
- Rapid availability
-
Specifications
- - collapse all
Mechanical
Range 20-360º - Housing Material Molded plastic - Height, Length, Width H. 25mm x L. 56mm x W. 50mm - Mounting Use 2 x M4 socket head cap screws and M4 washer Maximum tightening torque 2Nm Weight <51g - Electrical
Input 9 to 30Vdc (unregulated) and 5 ±0.5Vdc (regulated) A2: 13.5 to 30Vdc (unregulated) Output Dual redundant - ratiometric, PWM 0 to 5Vdc, .5 to 4.5Vdc, 0-10Vdc, PWM Freq-244,500,1000Hz Over-Voltage √ Up to 40 (-40 to +60°C) Reserve-Voltage √ - Output Short-Circuit Protected √ Output to supply in 5V regulated mode only Connections Amp 1.5 super seal, Deutsch DT04-6P Resolution 0.0025 of range/12 bit - Environmental
Operating Temperature Range Output A1, A4, P1-3 40°C to +140°C (5V supply)40°C to +135.7°C (9V supply) Derate upper temperature limit by 1.7°C for every 1V increase in supply Output A2 40°C to +115°C (13.5V supply) Derate upper temperature limit by 0.91°C for every 1V increase in supply Storage Temperature Range 55°C to +140°C - Protection Class IP68 - with AMP connector option (when recommended mating part is fully connected) IP67 - with Deutsch connector option (when recommended mating part is fully connected) Vibration BS EN 60068-2-64:1995 Sec 8.4 (31.4gn rms) 20 to 2000Hz Random - Shock 3m drop onto concrete and 2500g - Markets
Industrial - Applications
Extreme Environments Excellent where shock, vibration, and extreme temperatures can occur Off-highway Construction Equipment - Agricultural Vehicles - -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information