Controls

Hydraulics

Curtiss-wright NRH300DP

No-contact, Rotary Position Sensor, Varying Voltage Range of 9-30v.

The Curtiss-Wright (Penny & Giles) NRH300DP utilizes proven Hall effect, sensing technology in a low-profile (8mm) housing with a separate magnet for true no-contact sensing.The electrical output span can be set to correspond to rotations of 20° to 360°, and the positional information is determined by the angle of the supplied magnet relative to the sensor body. The maximum air gap between magnet and sensor is 5.5mm, while concentric offsets of up to 2mm can be tolerated with minimal impact on output linearity. The magnet can be supplied in a convenient carrier, housed in a bolt, as a plug or loose.

Innovative circuit design allows the NRH300DP to be powered from a regulated 5V supply or a varying voltage in the range of 9-30V, such as a vehicle’s batter. The  NRH305DR supply is limited to a regulated 5Vdc supply only but includes connections for a second supply to separately power each of the two outputs, for additional redundancy and error checking.

 

  • + expand all
  • - collapse all

Specifications

Mechanical

Measurement Angle 20-360º In 1" increments
Mechanical Angle 360° continuous -
Maximum Operating Speed 3600°/s -
Direction Variations available See literature
Cable 4-core, FDR25 jacket, 24AWG type 55A wire -
Mounting 2x M4 screws -
Weight <45g -

Electrical

Supply Voltage 5Vdc ± 0.5Vdc or 9Vdc to 30Vdc -
Supply Current <25mA -
Analog Output 0.5-4.5V or 0.2-4.8V PWM output option
Supply Reverse Polarity Protection Yes -
Short-Circuit Protection To Gnd. Yes -
Short-Circuit Protection to Supply When used with 5V supply only -
Over-Voltage Protection Up to 40Vdc (-40°C to +60°C) -
Power-On Settlement <1s -
Resolution 12-bit (0.025% of measurement range -

Environmental

Operating Temperature Range ­40°C to +120°C -
Storage Temperature Range ­40°C to +120°C -
Protection Class IP68, IP69K -
Vibration BS EN 60068-2-64:1995 Sec 8.4 (31.4gn rms) 20 to 2000Hz random -
Shock 2500g -
Life Virtually infinite -

General

Features and Benefits - -
No-contact, Hall effect technology -
Wear free – unlimited mechanical life -
Simple mounting, low-profile design -
Measurement angle 20-360° -
5v or 9-30v supply options -
Single or dual redundant outputs -
Analog output – 0.5-4.5v or 0.2-4.8v -
PWM output – 244 Hz, 500Hz or 1,000 Hz -
Fail-safe outputs -
Sealing to IP69K -
Flying leads -

Other

Applications - -
Hostile Environments -
On- and Off-Highway Vehicle -

Industry Applications

Lift System

This material handling lift system is used in automated warehouse applications to move material from floor to floor similar to […] Read More

Military Transport

The Palletized Loading System (PLS) is the backbone of the military’s distribution and resupply system. Built to carry ammunition and […] Read More

Lattice Boom Crawler Crane

When operating a construction crane, safety and precise control are top priorities. The operator is often lifting and moving large […] Read More

High-Dump Sewer Cleaner

This high-dump truck is used to raise the storage vessel to empty into a roll off dumpster. The original version […] Read More

Resources

Can't find what you are looking for or need more information? Contact us