Controls

Hydraulics

Parker Vansco VMM1210

12 Inputs, 10 Outputs, Multiplexing Control Module.

The Parker Vansco VMM1210 Multiplexing Module is a software-programmable, multiplexing, input/output controller that monitors dedicated and general-purpose inputs, and controls solid-state switch outputs. The VMM1210 is a general purpose controller for vehicle and other applications with a steady voltage of less than or equal to 32Vdc. The unit has 12 inputs and 10 outputs as well as a CAN/J1939 communication port. This module is 100% compatible with other Parker Vansco multiplexing modules.

Benefits of the Parker Vansco Multiplexing System

  • Designed to Standards
  • Multi-Master or Peer-to-Peer Feature
  • Auto-programming (Plug and Play) Feature
  • Diagnostics
  • + expand all
  • - collapse all

Specifications

Mechanical

Dimensions, overall L 5.04" x W 9.72" x D 1.73"
Connection (2) Delphi Metri-pack series 18-pin connectors Used to interface with the inputs, outputs, and CAN

Electrical

Supply Voltage (Vdc) 7-32Vdc
Inputs: Voltage/Frequency/Digital 12 Total 4 voltage / frequency / digital / 8 programmable digital (active high or active low) Voltage min (max) up to 4 Frequency min (max) up to 4 Digital min (max) up to 12
Outputs: Proportional/Digital 10 Total 8 digital high / 2 digital high or low 8 Digital outputs @ 10 amps each 80 amps maximum 2 separate busbars - max PWM frequency 1000 Hz (for both high side and low side drivers)
CAN Communication SAE J1939 1

Environmental

Operating Temperature Range −40°C to +85°C
Storage Temperature Range −55°C to +125°C
Environmental Protection IP66 Built to meet stringent SAE J1455/EP455

System

Diagnostic/LEDS/Display 24 red diagnostic LEDS Default fault codes includes short to ground or power, over current, and open loads
Processor
Software Windows-based ladder logic programming Can be used alone or with other multiplexing modules
Other Easy to integrate into any on-highway or off-highway vehicle (2) high side busbar can be used at different voltages (voltage input Bar #1 - 12V or 24V) (voltage input Bar #2 - 12V or 24V)

Industry Applications

Aerial Pumper

This fire truck includes a 105′ extension boom and ladder that rotates at the base. Outriggers are deployed to stabilize […] Read More

Lift System

This material handling lift system is used in automated warehouse applications to move material from floor to floor similar to […] Read More

Mining Truck

This mining truck is used to haul tremendous loads of material across rough terrain and roads at a mine site. […] Read More

Row Sprayer

This row sprayer is used in multiple agriculture application for applying liquid chemicals for a variety of crops. This machine […] Read More

Twin Row Merger

The Twin Row Merger is used to collect three rows of crop into a single row for efficient harvesting. The […] Read More

Resources

Can't find what you are looking for or need more information? Contact us