VMM0604 Module
Stand-alone Controller CAN/J1939 Multiplexing Module, General Purpose for Vehicle & Other Applications With Steady Voltage Of Less Than or Equal to 32Vdc, 6 Inputs, 4 Outputs.
The VMM0604 is a rugged CAN controller unit that is a perfect controller for mobile equipment when used alone or with other VMM modules in a control system. The VMM0604 communicates using the J1939 protocol over a CAN- bus connection.
The VMM0604 is a rugged CAN controller its inputs can measure analog, digital and frequency signals, while the PWM (pulse width modulated) capable outputs are ideally suited for hydraulic valve control.
The VMM0604 is able to be the main controller in a small system or may be combined with other modules in a larger system for vehicle markets including agriculture, on-highway trucks and buses, and off-road construction equipment. Equipped with an aluminum housing and environmentally sealed, 35-pin connector, this controller is designed for the outdoor environment.
The VMM0604 is programmed using VMMS, a ladder logic programming tool that allows customers to develop their own software, making the VMM0604 perfect for any application.
The multiplexing system is designed to simplify and reduce electrical system troubleshooting, maintenance, and file management time. The modules have status LEDs that indicate the condition of inputs, outputs, power, and network activity.
-
Specifications
- - collapse all
Mechanical
Controller Type Master Controller - Dimensions, Overall L 7.8" x W 5.7" x D 1.85" − Connection 35-pin Ampseal connector Used to interface with the inputs, outputs, and CAN Weight 895 (g) - Electrical
Supply Voltage 7-32 (Vdc) − - - Inputs 6 - Voltage inputs Up to 6 -Signal range 0-32Vdc -Resolution @ 5Vdc 5 mV Frequency inputs Up to 6 -Signal range 0 - 10000 Hz Digital inputs Up to 6 -Signal-high 3.4Vdc - VBAT -Signal-low 0-1.3Vdc - - Outputs 4 - Digital out high 4 -Type High-side switch -Max. load 3.0 A -Max PWM frequency 500 Hz Digital out low 4 -Type Low-side switch -Max. load 3.0 A - - Electrical Connection Amp Super Seal - Output Current Rating (A) 2.5 - Environmental
Operating Temperature −40°C to +85°C − Storage Temperature −55°C to +125°C − Environmental Protection IP66 Built to meet stringent SAE J1455/EP455 System
Diagnostic/LEDS/Display 12 red diagnostic LEDS Default fault codes includes short to ground or power , over current, and and open loads. Software VMMS Ladder Logic Can be used alone or with other multiplexing modules Features & Benefits
Monitors up to 6 inpts Analog, digital or frequency 4 high-side 2.5 A outputs - 4 low-side 2.5 A outputs - Pulse Width Modulation for proportional valve control - Multiplexing module is self-programming when replaced in multiple module systems - General
Model, Part Number(s) Model Number: VMM0604 Part Number: 0836001ECD Communication
SAE J1939 1 - Markets
Construction Equipment - Transportation - Agriculture Machinery - Material Handling Equipment - Forestry - Specialty - Transportation - Applications
Bus Kneel and Door Open Control - Fan Drive Controller - Truck Mounted Crane Control - -
Market Applications
Forwarder and Loader
The forwarder and loader transports the timber across rough forest terrain to the processing site near the forest road. Efficient […] Read More
Mobile Straddle Crane
This mobile straddle crane handles multi-million dollar yachts, barges, and large ocean-going vessels which requires precise and carefully coordinated movements. […] Read More
Off-Road Forklift
This off-road forklift is used to support large building construction projects. The forks can be loaded with up to 11,000 […] Read More
Concrete Pumpers Benefit from Electronic Control
Market Knowledge and Solutions GS Global Resources component and software selection for the concrete pumper industry (mobile equipment) is clearly […] Read More
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
