Controls

Hydraulics

Parker ATS90

Sensor Condition Monitoring 0-5Vdc Non-Contact, Hall Effect, Angle/Tilt – Dual-Axis.

The Parker ATS90 is a non-contact, Hall effect angle/tilt sensor for mobile hydraulic applications. The ATS90 will sense angular movement in two axes and output a ratiometric 0-5Vdc signal for each axis based on position. The sensor has twelve-inch leads and an attached Deutsch connector.

Angle/Tilt Sensors are Hall Effect devices with an output dependent upon the angular movement in one or two horizontal planes. They are non-contacting and are offered in single or dual axis configurations to fit most every level application need.

The ATS90 is a dual-axis, non-contacting tilt sensor that can be used to indicate level to near level position in many mobile hydraulic applications. The Parker ATS50 is a single-axis sensor.

  • + expand all
  • - collapse all

Specifications

Mechanical

Sensor Type Tip/tilt -
Housing Style Custom molded -
Housing Material ABS plastic -
Working Angle ±10° each axis Dual-axis
Height 3.25" -
Length 5.75" -
Width 4.74" -
Mounting Bracket 3 point bracket
Mounting Holes 7.24 mm (x4) -
Operating Life 10 million cycles -
Shock 1m drop -
Vibration 10 Gs -

Electrical

Input Supply voltage 12Vdc nominal -
Output 0.5 to 4.5Vdc Ratiometric
Connector Deutsch DTM 12 inch leads

Environmental

Operating Temperature Range −35°C to +85°C -
Humidity 100% -
Environmental Protection IP67 Potted electronics
Chemical Environment Liquids (resistance) Standard automotive

System

Proportional Indication of Tilt Dual-axis -

General

Features: - -
Switched output No
Proportional output .5-4.5Vdc
No. of axis 2
Working angle (°) ±10
Part number 01716

Other

Application: - -
Outdoor applications - Mobile industry -
Very robust and able to withstand rugged applications -
They are non-contacting and are offered in single or dual-axis configurations to fit most every level application need ATS50 & ATS90

Industry Applications

Aerial Pumper

This fire truck includes a 105′ extension boom and ladder that rotates at the base. Outriggers are deployed to stabilize […] Read More

Coordinated Jacking System

Performing maintenance for some of the world’s largest mining machines can be a daunting task since the machines can weigh […] Read More

Off-road Fork Lift

This off-road fork lift is used to support large building construction projects. The forks can be loaded with up to […] Read More

Self-Leveling Scaffold

This power scaffold is used in large building construction projects. The scaffold can be loaded with up to 20,000 pounds […] Read More

Twin Row Merger

The Twin Row Merger is used to collect three rows of crop into a single row for efficient harvesting. The […] Read More

Resources

Can't find what you are looking for or need more information? Contact us