HJFC Foot Pedal
Hall Effect Foot Pedal, J1939 CAN-Open Formats Available, Programmable.
The HJFC Hall Effect Foot Pedal is built to perform under the worst possible conditions. The unique design places Hall effect sensors and electronics behind a solid plastic diaphragm that separates the top and bottom halves of the front pedal, sealing the electronics in an IP68S rated enclosure. The bottom half of the pedal utilizes the same proven contactless analog output Hall effect technology used in OTTO joysticks and is available in J1939 and CANopen® formats. The CAN interface provides three analog input channels, 12 digital input channels and two digital output channels. It will withstand operating temperature extremes of -40°C to +85°C, is sealed to IP68S immersion requirements and passes EMI/RFI immunity testing to 100V/M.
The HJFC Hall Effect Foot Pedal provides a life of nine million cycles. The pedal’s pivot point itself is also sealed against large debris. Customer specified features such as pretravel (dead band) and overtravel, along with a minimum and maximum output, are programmable. The sensor programming is completed in automated fixtures during assembly ensuring tight output tolerances. The HJFC Hall Effect Foot Pedal offers more performance features and a higher cycle and seal rating than any other foot pedal on the market.
Features
- Outstanding EMI/RFI immunity
- Heavy gauge, corrosion-resistant metal
- Proven contactless analog output Hall effect technology
- J1939, CANopen® formats available
- Life expectancy of 9 million cycles
- Hall sensors & electronics are sealed against the elements, behind a solid plastic diaphragm that separates the top & bottom halves of the foot pedal
- Electronics are sealed to IP68S
- Pedal pivot point sealed against large debris
- Programmable pretravel (dead band) & overtravel along with minimum & maximum output
- Sensor programming is completed in automated fixtures during assembly ensuring tight
output tolerances - Reverse polarity protection available
- RoHS compliant
-
Specifications
- - collapse all
Mechanical
Axis Options Dual axis - Pedal Angle (Degrees) 13° nominal dual direction; 15° nominal single direction - Static Load (Lbs/Newtons) 14 Lbs operational - Life Cycles 9,000,000 - Locks-Detents None - Vibration 10g. 24Hz to 2KHz swept sinusoidal - Travel Angle Degrees: 13° nominal dual direction, 15° nominal single direction Operating Force (lbs.): 14.0 lbs. typical -40°C to +85°C at load reference point Electrical
Electrical Life 9,000,000 cycles - Resolution Virtually infinite Controller dependent Supply Voltage (Vdc) 5Vdc Available in J1939 and CAN-Open® formats Output Control Signal-Potentiometric or Hall Effect Hall effect Others available upon request Output Voltage Range % 0.5 to 4.5Vdc 2º actuation Directional Safety Switches Yes - Connection Lead with connector options - Supply Current Per Sensor Units mA Max 10 Output Resistance (lo ≤ -2mA) Ω - Typ 100 Analog Supply Voltage (Option 1) [Units VDC] Min 4/5 Typ 5 Max 5.5 Analog Supply Voltage (Option 2) [Units VDC] Min 8 Typ 12 Max 18 Analog Output Voltage Tolerance at Center [Units VDC @ 5Vcc] Min -0.15 Max +0.15 Analog Output Voltage Tolerance at Full Travel [Units VDC @ 5Vcc] Min -0.15 Max +0.15 Limit Switch Supply Voltage [Units Volts] Min 5 Max 30 Limit Switch Actuation (if applicable) [Units Degrees] Min 1° Typ 2° Max 3° Analog Output Pretravel [Units Degrees] Min 1° Typ 2° Max 3° Analog Output Overtravel [Units Degrees] Min 1° Typ 2° Max 3° Seal Electronics IP68S - RFI Withstand per SAE J1113 - EMI Withstand per SAE J1113 - Environmental
Operating Temperature Range −40°C to +85°C - Storage Temperature Range −40°C to +85°C - Environmental Protection IP68S - Humidity 96% RH, 70°C, 96 hours - Drop 1 Ft. Max. to Concrete - Vibration 10g. 24Hz - 2KHz; Swept Sinusoidal - Sand/Dust Withstand per SAE J1455 - Materials
Foot Pedal Plate: Zinc and high corrosion trivalent chromate - Housing: PPE/PA - Cable 22 AWG (19 strands of 34 AWG TSC) PVC/Polyurethane blend outer jacket - Mounting Hardware None provided - Features & Benefits
Outstanding EMI/RFI immunity - Heavy gauge, corrosion-resistant metal - Proven contactless analog output Hall effect technology - J1939, CANopen® formats available - Life expectancy of 9 million cycles - Hall sensors & electronics are sealed against the elements, behind a solid plastic diaphragm that separates the top & bottom halves of the foot pedal - Other
Treadle Options Plated steel - Output Controls Other options available - Housing of glass filled thermoplastic Mounting hardware not provided Markets
Mobile Equipment - -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information