LP30 Series
Incremental, Non-Contact, Linear Position Transducer, IP69K, Up to 1/2″ Air Gap Between Sensor/Track.
The LP30 Magnetic Linear Position Sensor utilizes a magnet sensing technique to allow for a fully sealed non-contacting linear sensor. The output is a J1939 CAN-bus interface that is fully sealed to IP69K. The LP30 position sensor can measure linear-position at ¼-inch to 1-inch resolution with non-contact sensing.
- J1939 CAN-bus incremental or absolute linear
- Non-contact with a wide sensing range
- Compact housing for simple integration
- MIL-SPEC 202 rating for shock and vibration
- 1/4″ to 1″ resolution standards – Custom resolution and magnet assemblies available
- Intelligent and rugged replacement to wire-reel/string-pot boom measure systems
The non-contact LP30 has a wide sensing range and does not require a wire reel to measure the boom as it extends. The potted magnets are attached to the boom and the sensor measures the magnets as they pass.
-
Specifications
- - collapse all
Mechanical
Range Miles Track length dependent Housing Material Aluminum housing with magnetic strips fully potted Body of anodized aluminum or stainless steel Height 47.2mm 30.5mm w/o M12 connector Length Ø30mm - Width Ø30mm - Mounting 30mm proximity switch-style - Weight 2.2 oz 1 oz w/o mounting nuts Electrical
Input 6-30Vdc - Output J1939, addressable Incremental position Over-Voltage √ - Reserve-Voltage √ - Output Short-Circuit Protected Power, J1939 communication status - Resolution 1/2 inch 1/4 inch optional Environmental
Operating Temperature Range −40°C to +80°C - Storage Temperature Range −40°C to +90°C - Humidity 100% - Environmental Protection IP69K (Housing) Connector dependent Vibration 5 to 3000 Hz Resists mechanical shock, vibration, temperature, and contaminants Shock 400g/6ms Resists mechanical shock, vibration, temperature, and contaminants Markets
Mobile - Agriculture - Forestry - Military - Construction - Mining - -
Market Applications
Aerial Pumper
This fire truck includes a 105′ extension boom and ladder that rotates at the base. Outriggers are deployed to stabilize […] Read More
Off-Road Forklift
This off-road forklift is used to support large building construction projects. The forks can be loaded with up to 11,000 […] Read More
Self-Leveling Scaffold
This power scaffold is used in large building construction projects. The scaffold can be loaded with up to 20,000 pounds […] Read More
Twin Row Merger
The Twin Row Merger is used to collect three rows of crop into a single row for efficient harvesting. The […] Read More
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information
