KR Series
Power Rocker Switches with a State-of-the-Art Look Based on Curved Shapes.
The KR Series is an illuminated version, laser etching allowing direct marking on the rocker, without using lenses. To simplify and optimize assembly when several switches are involved, there are additional offers for panel mounting units and connectors.
Power rocker switches available with 2 or 3 positions, with one locked position. The actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.
New options for the KR and KL Series Rocker Switches include an elastomer membrane to protect against dust.
-
Specifications
- - collapse all
Mechanical
Panel Thickness 0.8 mm to 4.6 mm - Recommended Panel Thickness Between 2 mm and 3.5 mm - Mechanical Life 150,000 cycles. min. - Actuator Type Locking - Mounting Type Panel mount, snap-in - Switch Funtion On-On - Removable Actuator Easy to stock Easy to customize Up-to-Date Rocker Design Smooth curves Wide choice of colors and symbols High Performance LEDs Long life expectancy An array of colors and voltages Integrated Resistors Easy electrical connection - Large Variety of Terminal Options Up to 10 terminals Screw, solder lug and quick-connect Electrical
Current/voltage Rating with Resistive Load Silver plated contact (A): 5A 24Vdc, 100,000 cycles 10A 24Vdc, 10,000 cycles (terminals 6.35 x 0.8 only) Gold plated contacts (D) 20mA 12V, 150,000 cycles Current/Voltage Rating with Lamp Load Silver contacts (A) functions 1 & 6: 100w 24Vdc, 10,000 cycles Other functions 60w 24Vdc, 10,000 cycles Initial Contact Resistance 10 mΩ max. - Insulation Resistance 1,000 MΩ min. at 500Vdc - Dielectric Strength 2,000 Vms 50 Hz min. between terminals - Environmental
Operating Temperature Range Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) - Degree of Protection of Sealed Versions Frontal sealing to IP68 Acc. To IEC 60529 (submersion under 1 meter of water for more than 30 minutes) General
Features - - An infinite number of symbols available for all rocker colors withing a short time - A behind-panel depth lower than equivalent models in the market - Optional IP68 front panel sealing - 10-terminal versions allowing independent LED circuit or additional integrated functions - - - Materials - - Case: PA 6-6 - Actuator: ABS - Bezel: PA 6-6 - Contacts & terminals: Brass, solid silver grain, silver plated (A or S) or brass, solid silver grain, gold plated (D) Contact Roller Brass, nickel plated -
Market Applications
-
Resources
Can't find what you are looking for or need more information? Contact us
-
Request Information