APEM KL Rocker Switches

Locking Power Rocker Switches, Panel Mount, Snap-In.

Power rocker switches available with 2 or 3 positions, with one locked position. The actuator must be pressed to activate the protected function of the rocker. Two frames protect the unlocking actuator from untimely activation. Patented intuitive ergonomics.

APEMS’s KR and KL rocker switches feature up-to-date design, with a large choice of colors and markings, extreme robustness, and high ratings.

Main Features:

  • Wide choice of colors
  • Laser etched symbols
  • Illuminated or non-illuminated
  • Optionally sealed to IP68

New Options For Rockers (read here)…


  • + expand all
  • - collapse all



Panel Thickness 0,88 mm to 4,6 mm -
Recommended Panel Thickness Between 2 mm and 3,5 mm -
Mechanical Life 150,000 cycles min. -
Actuator Type Locking -
Mounting Type Panel mount, snap-in -
Switch Function On-On -


Current/voltage Rating with Resistive Load Silver plated contacts (A) : 5 A 24 Vdc, 100,000 cycles ; 10 A 24 Vdc, 10,000 cycles (terminals 6.35 x 0.8 only Gold plated contacts (D) : 20 mA 12 V, 150,000 cycles
Initial Contact Resistance 10mΩ max. -
Insulation Resistance- 1,000 МΩ min. at 500 Vdc -
Dielectric Strength 2,000 Vrms 50 Hz min. between terminals -


Operating Temperature Range -45°C to +85°C -
Salt Spray Resistance 96 hours according to IEC 512-6, test 11f -
Environmental Protection Frontal sealing to IP68 according to IEC 60529 (submersion under 1 meter of water for more than 30 minutes) -


Materials - -
Case PA 6-6
Actuator and unlocking actuator ABS
Bezel PA 6-6
Contacts & terminals Brass, solid silver grain, silver plated (A) or brass, solid silver grain, gold plated (D)
Contact roller Brass, nickel plated


Can't find what you are looking for or need more information? Contact us